Harga Baja VCN

Steel VCN 150

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Iklan

Harga Plat Mild Steel ASTM A-36

Characteristic

Mild Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications. Mild Steel Plate ASTM A-36 is one of the most commonly used hot rolled general structural steel. Typical carbon steel materials, they are very cheap, excelling in weldability & machinability and they can be subjected to various heat treatments.

Availability
Supplied as plates, sheets, flats, bars, sections, etc.
Plate Thickness: 4.5 mm, 6 mm, 8 mm, 10 mm dan 12 mm
Size: 5′ x 20′ , 6′ x 20′ , 4′ x 8′
Size: Thickness x Width x Length

Specifications
Grade: ASTM A36, AISI A-36
Workability: Easy to Weld, Cut, Form and Machine

Mechanical Properties

  • Density (kg/m3): 7860
  • Young’s Modulus (GPa): 190-210
  • Tensile Strength (MPa): 400 – 510 MPa
  • Yield Strength (MPa): 205-245 MPa
  • Poisson’s ratio: 0.26
  • Brinell Hardness (HB) 160

Equivalents
DIN Equivalents for JIS SS400: 17100 St 44-2
ASTM Equivalents for JIS SS400: ASTM A36, ASTM A283 Grade D
EN Equivalents for JIS SS400: EN S275/ BS 43A

Chemical Composition (%)
Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.

Tabel Ukuran & Berat Nominal Plat ASTM A-36:
Product Thickness (mm) Standard Sheet Size Weight per square metre
Mild Steel Plate 3mm 3.00 1200 x 2400mm (1.2 x 2.4m) 23.55
Mild Steel Plate 4mm 4.00 1200 x 2400mm (1.2 x 2.4m) 31.4
Mild Steel Plate 5mm 5.00 1200 x 2400mm (1.2 x 2.4m) 39.25
Mild Steel Plate 6mm 6.00 1200 x 2400mm (1.2 x 2.4m) 47.1
Mild Steel Plate 8mm 8.00 1200 x 2400mm (1.2 x 2.4m) 62.8
Mild Steel Plate 10mm 10.00 1200 x 2400mm (1.2 x 2.4m) 78.5
Mild Steel Plate 12mm 12.00 1200 x 2400mm (1.2 x 2.4m) 94.2
Mild Steel Plate 16mm 16.00 1200 x 2400mm (1.2 x 2.4m) 125.6
Mild Steel Plate 20mm 20.00 1200 x 2400mm (1.2 x 2.4m) 157
Mild Steel Plate 25mm 25.00 1200 x 2400mm (1.2 x 2.4m) 196.25
Melting Point
Melting point of SS400 is 1430 Degree Celsius
Applications:
base plates, gussets, liners, road plates, trench covers, etc.

Related Carbon Steel:

Harga AISI 1045 Steel

AISI 1045 Steel Roundbar

Characteristic
AISI 1045 Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
AISI 1045 Steel Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

Hardness
Brinell Hardness (HB) 160-220 (Annealed)

Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to: sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Creusabro 4800 & 8000

Characteristic

For wear and tear which is not only caused by impact and friction, we provide CREUSABRO 4800 and CREUSABRO 8000. These products have TRIP (Transformation Induced by Plasticity) character and micro carbides that make this product have an active surface resistance, so that this material can last better if there is an impact. This product o can also be used in medium temperature 250–450 C, where other resistance product which generates from water quenched process usually will not be functioning optimally.

Creusabro 4000
The new Creusabro concept-excellent ability to work harden and contribution of micro carbides-gives Creusabro 4000 high wear resistance, on average 4 times higher than ordinary mild steel and 30 % higher than conventional 4000 BHN water quenched steel.

To ease in fabricating, Creusabro 4000 is supplied by approximately 360 HB hardness. After the fabrication, the hardness of Creusabro 4000 can be reach 420 HB.

Chemical Composition:

C : 0.20 max
Mn : 1.40
Cr : 0.85 min
Mo : 0.10 min
Ni : 0.30
S : 0.010 max
P : 0.018 max

Applications:
Mines: Extractors, Unloaders, Spiral Chutes. Crusher, Grinders, Screens, Conveyor
Quarries and Construction Earth Moving: Shovels, Diggers, Graders, Bulldozers, Dumpers, Dredging machines, Crushers, Grinders, Screens, Hoppers, Mixers, Molds for concrete aggregates
Cement Plants, Refractory Products: Crushers, Hoppers, Chutes, Cyclone, Wheel Excavator Buckets Metallurgical Plant, Scrap recovery, etc

The Creusabro concept-excellent ability to work harden and the supplementary contribution of microcarbides, already used in Creusabro 4000 has been improved in the Creusabro 8000. this grade takes advantage of an additional metal working process: the TRIP effect (Transformation Induce by Plasticity). The combination of this properties give to the Creusabro 8000 an exceptional wear resistance in heavy plates with uniform properties throughout the thickness around 8 times that of the standard mild steel (A572 G65 grade). The properties in extreme conditions are 50% superior to standard water quenched steel (hardness 500HB).

Creusabro 8000

Creusabro 8000 is supplied with the hardness of 420 HB in order to easy the fabrication. After fabrication, the hardness of Creusabro 8000 can reach 540 HB.

Chemical Compositions:
C Mn Cr Mo Ni S P
0.280 max 1.60 max 1.60 max 0.20 min 0.40 0.005 max 0.015 max

Applications:

Mines, Coal mines: Extracting and load equipment, Hopper lateral liner plate, Helical gravity conveyor.
Quarries and Construction Earth Moving: Blades, Outside Stiffeners, Under teeth pads of loaders and shovel dippers, Crushers and Mills lateral armor plate, Feed crown-wheel, Sprocket-wheal.
Cement Plants: Liners for drier-tubes, Buckets, Hoppers, Clinker cooler outlet shields.
Iron and Steel Industry: Scrap recovery, Brick works, Agricultural equipment, etc.

beyond-steel indonesia, distributor creusabro indonesia jual creusabro, ukuran creusabro,harga creusabro,diameter creusabro,dia. creusabro,beli creusabro,distributor creusabro,tebal creusabro,berat creusabro,pabrik creusabro, stockist creusabro,grade creusabro, suplier creusabro,chemical composition creusabro, equivalent of creusabro, mechanical properties creusabro, physical properties creusabro, properties of creusabro, hrc creusabro,thickness creusabro, hardness creusabro

Plat FORA 400

Characteristic

FORA 400 is a water quenched maternistic steel, with a typical hardness of 400HB (42,5HRC), constituting a real answer to abrasive wear. Thanks to its toughness, its elevated hardness, its high yield strength, FORA 400 can be use wherever a wear resistance to wear by sliding or by moderate impacts is required. Moreover, FORA 400 is very easily welded and has a good forming properties thereby contributing to ease of fabrication.

Compared to conventional steels, such as S355, FORA 400 offers a real benefit to the equipment life times and permits a signifiant reduction in he design thickness since its wear resistance is up to 3 times longer than S355 grade.

Moreover, FORA 400 is very easily welded and has a good forming properties thereby contributing to ease of fabrication. This steel is particulary suitable for applications in quarries, construction industry, mines, cement plants, the iron and steel industry, etc.

Chemical Composition
C Mn Cr Mo S max P max
0.13 1.2 0.5 0.25 0.01 0.02

Applications
Quarries and Construction Earth Moving: Skimmers, crushers, screens, bunkers, bulldozers, etc.
Cement Plants: Buckets, crushers, bunkers, etc.
Mines, Coal mines: Excavator, winding and discharging machines, conveyors, etc.
Iron and steel industry: Bunkers, various casing, guide and shifting plates, etc.

Beyond-Steel Indonesia, distributor FORA 400 Indonesia jual FORA 400, ukuran FORA 400,harga FORA 400,diameter FORA 400,dia. FORA 400,beli FORA 400,distributor FORA 400,tebal FORA 400,berat FORA 400,pabrik FORA 400, stockist FORA 400,grade FORA 400, suplier FORA 400,chemical composition FORA 400, equivalent of FORA 400, mechanical properties FORA 400, physical properties FORA 400, properties of FORA 400, hrc FORA 400,thickness FORA 400, hardness FORA 400

Related Wear Plates:

Steel Thyssenkrupp 6582

Product: Thyssenkrupp 6582

Kategori: High Tensile Nickel Chrome Steel

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent Thyssen 6582
AISI 4340, DIN 34NiCrMo6, ASSAB 705, VCN 150, JIS SMCM 431, Atlas Ultimo 200

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38-0.43 0.20-0.35 0.60-0.80 0.40 Max 0.04 Max 1.65-2.00 0.70-0.90 0.20-0.30

Mechanical Properties

Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Product Machinery Steel:

SKD 61 Steel Price

Product  : SKD 61
Standard: JIS
Grade     : Hot Work Tool Steel

High temperature wear resistance and ductility, good heat conductivity, low susceptibility to hot cracks, Good Creep resistance.
In order to bring out its excellent characteristics, SKD61 needs quenching, and after quenching, it is tempered to stabilize the metallographic texture and to improve its toughness. However, since it is known that depending on the conditions of tempering SKD61 causes change of dimensions and reduction of hardness, unforeseen failures can result if the tempering is done without understanding this trend. Therefore, in this course, the tempering characteristics of SKD61 are explained below.

 

Equivalent SKD 61
Thyssen 2344, DIN X40CrMoV51, AISI H13, JIS SKD 61, BOHLER W302 SUPERIOR®

Availability
Roundbar : Ø 10 mm – 303 mm
Square : 10 mm – 100 mm
Plate/Flat Thk : 10 -100 mm
Width : 25-1000 mm
Supplied Condition: Annealed

Harga: Rp. 95.000 – Rp.135.000/ Kg

Chemical composition SKD 61: ( % )

C Si Mn Cr Mo V
0.35-0.40 0.80-1.20 0.25-0.40 4.80-5.50 1.25-1.50 0.85-1.15
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied

Application SKD 61
Extrusion mandrel, press and forging dies, moulds for pressure casting low density metals, ejector pins, Universal hot work tool steel,etc

Hubungi Kami