Harga Baja VCN

Steel VCN 150

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Iklan

Harga AISI 1045 Steel

AISI 1045 Steel Roundbar

Characteristic
AISI 1045 Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
AISI 1045 Steel Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

Hardness
Brinell Hardness (HB) 160-220 (Annealed)

Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to: sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Steel 6582

Product: Thyssenkrupp 6582

Kategori: High Tensile Nickel Chrome Steel

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent Thyssen 6582
AISI 4340, DIN 34NiCrMo6, ASSAB 705, VCN 150, JIS SMCM 431, Atlas Ultimo 200

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38-0.43 0.20-0.35 0.60-0.80 0.40 Max 0.04 Max 1.65-2.00 0.70-0.90 0.20-0.30

Mechanical Properties

Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Product Machinery Steel:

Harga Steel S45C

Characteristic
Steel S45C is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
Steel S45C Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

S45C Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

S45C Hardness
Brinell Hardness (HB) 160-220 (Annealed)

S45C Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

S45C Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to:  sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Harga Besi H-beam Standar SNI

Beyond-steel Indonesia menjual baja konstruksi H-Beam berbagai jenis dan ukuran. Untuk Ukuran yang ready stock, maupun informasi pemesanan silahkan mengisi form inquiry yang telah tersedia atau dapat menghubungi sales kami

 

Characteristic

Hot-rolled steel beam with H-shaped cross section, used mainly in piling and retaining structures. A structural beam of rolled steel or concrete having a shape whose cross section resembles the letter H; has wider flanges than an I-beam.

Tabel Ukuran, Berat Nominal & Harga H-Beam » Klik Disini «

Mechanical Properties

Grade

Tensile Test

Impact Test

Thickness

Yield Strength

Tensile Strength

Thickness

Elongation

Temp

V-notch Impact Energy

(mm)

σs (MPa)

σb (MPa)

δ5 (mm)

δ5 (%)

(°C)

Akv (J)

Q235A

≤16

≥235

375-500

≤16

≥26

Q235B

>16-40

≥225

>16-40

≥25

20

≥27

Q235C

>40-60

≥215

>40-60

≥24

0

Q235D

-20

Q345A

≤16

≥345

470-630

≥21

Q345B

>16-40

≥325

20

≥34

Q345C

>40-60

≥295

≥22

0

Q345D

-20

Q345E

-40

≥27

Q345T

≥345

470-630

≥21

20

≥49.54J/cm2 (Akv )

-40

≥23.2J/cm2 (Akv )

SS400

≤16

≥245

400-510

>5-16

≥17

>16-40

≥325

>16-50

≥21

SM400B

≤16

≥245

400-510

>5-16

≥18

0

≥27

>16-40

≥325

>16-50

≥22

SM490B

≤16

≥325

490-610

>5-16

≥17

0

≥27

>16-40

≥315

>16-50

≥21

SM490YB

≤16

≥325

490-610

>5-16

≥15

≥27

>16-75

≥355

>16-50

≥19

ASTM A36

≥250

490-550

200mm

≥20

[36]

[58-80]

ASTM A572(GR50)

≥345

≥450

200mm

≥18

[50]

[65]

ASTM A992

≥345

≥450

200mm

≥18

[50-65]

[65]

ASTM A36/A572 (GR50)/A992

≥345

450-550

200mm

≥21

[50-65]

[65-80]

43A

≤16

≥275

430-580

≥22

>16-40

≥265

50B

≤16

≥355

490-640

≥20

20

≥27

>16-40

≥345

55C

≤16

≥450

550-700

200mm

≥17

0

≥27

>16-25

≥430

>25-40

≥415

Besi CNP SNI

Deskripsi
Besi Kanal C atau sering juga disebut: CNP, balok purlin, C-channel, profil C biasa digunakan untuk : purlin (balok dudukan penutup atap), girts (elemen yang memegang penutup dinding seperti metal sheet) member pada truss, rangka komponen arsitektural,dll

Tabel Ukuran dan Berat Besi Kanal C (CNP) SNI:
Product Size Berat 
Kanal C 60 X 30 X 10 X 1.6 = 9.8 Kg
Kanal C 60 X 30 X 10 X 2.3 = 13.5 Kg
Kanal C 75 X 35 X 15 X 1.5 = 12 Kg
Kanal C 75 X 45 X 15 X 1.6 = 14 Kg
Kanal C 75 X 45 X 15 X 2.3 = 19.5 Kg
Kanal C 75 X 45 X 20 X 2.3 = 19.5 Kg
Kanal C 100 X 50 X 20 X 1,6 = 24.36 Kg
Kanal C 100 X 50 X 20 X 2.3 = 24.36 Kg
Kanal C 100 X 50 X 20 X 3.2 = 33 Kg
Kanal C 125 X 50 X 20 X 2.3 = 27.06 Kg
Kanal C 125 X 50 X 20 X 3.2 = 37 Kg
Kanal C 150 X 50 X 20 X 2.3 = 30 Kg
Kanal C 150 X 50 X 20 X 3.2 = 40.6 Kg
Kanal C 150 X 65 X 20 X 2.3 = 33 Kg
Kanal C 150 X 65 X 20 X 3.2 = 45.06 Kg
Kanal C 200 X 75 X 20 X 3.2 = 55.62 Kg
Lebih Detail »

Besi I-Beam

Deskripsi

INP or I-Beam, IWF is a hot-rolled steel beam with H-shaped cross section, used mainly in piling and retaining structures. A structural beam of rolled steel or concrete having a shape whose cross section resembles the letter H; has shorter flanges than an H-beam.

Tabel Ukuran dan Berat Besi INP standard SNI:

 Product Size Weight (Kg)
INP 80 x 42 x 3.9 x 5.9 = 77 Kg
INP 100 x 50 x 4.5 x 6.8 = 101.2 Kg
INP 120 x 58 x 5.1 x 7.7 = 135 Kg
INP 140 x 66 x 5.7 x 8.6 = 175 Kg
INP 150 x 73 x 6 x 7 = 195 Kg
INP 160 x 74 x 6.5 x 9.5 = 217 Kg
INP 180 x 82 x 6.9 x 10.4 = 270 Kg
INP 200 x 90 x 7.5 x 11.3 = 315 Kg
INP 220 x 98 x 8.1 x 12.2 = 373 Kg
INP 240 x 106 x 8.7 x 13.1 = 435 Kg
INP 250 x 125 x 7.5 x 12.5 = 460 Kg
INP 260 x 113 x 9.4 x 14.1 = 503 Kg
INP 280 x 119 x 10.1 x 15.2 = 580 Kg
INP 300 x 125 x 10.8 x 16.2 = 661 Kg
INP 320 x 131 x 11.3 x 17.3 = 750 Kg
INP 340 x 137 x 12.2 x 18.3 = 833 Kg
INP 360 x 143 x 13 x 19.5 = 926 Kg
INP 380 x 149 x 13.7 x 20.5 = 1026.5 Kg
INP 400 x 155 x 14 x 22 = 1136.5 Kg
INP 450 x 170 x 16.2 x 24.3 = 1400 Kg
INP 500 x 185 x 18 x 27 = 1707 Kg