Harga Baja VCN

Steel VCN 150

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Harga Baja VCL

VCL 140 Steel Roundbar

Characteristics

Very common Quenched & Tempered alloyed engineering steel grade With high intensity, high hardenability. It has a small distortion afer quenching, a ghigh creep strength and lasting intensity afer processing of high tempreature.

Equivalent VCL 140

Thyssen 7225, DIN 42CrMo4, ASSAB 709, VCL140, JIS SCM 440, AISI 4140

Availability

Round bar
Sizes: 10mm – 400mm
Supplied Condition: Quenched & Tempered
Features
It’s one kinds of high quality alloy structural steel.
Chemical composition: ( % )
C : 0.38-0.45,
Si: 0.15-0.40,
Mn: 0.60-0.90,
Cr: 0.90-1.20,
Mo: 0.15-0.30
S\P=0.035,
Ni\Cu=0.030
Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied :
Application
It’s mainly used for making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the abckshaft, the conncetingrob and the pinchock under the high pressure. Parts for power train applications, cold formed fastener components, shafts, gears, drill collars for the oil exploration, etc.

Product Machinery Steel:

Harga AISI 1045 Steel

AISI 1045 Steel Roundbar

Characteristic
AISI 1045 Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
AISI 1045 Steel Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

Hardness
Brinell Hardness (HB) 160-220 (Annealed)

Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to: sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Jual AISI 4140 Steel Round Bar

Product : Steel AISI 4140
Kategori: Machinery Steel
Grades : Quenched & Tempered Alloyed Engineering Steel

Characteristics
AISI 4140 is a Chromium-Molybdenum through-hardening steel of medium hardenability. It is a general purpose high-tensile steel with medium strength level and good impact properties
Very common Quenched & Tempered alloyed engineering steel grade With high intensity, high hardenability. It has a small distortion afer quenching, a high creep strength and lasting intensity afer processing of high tempreature.

Equivalent
Thyssen 7225, DIN 42CrMo4, ASSAB 709, VCL140, JIS SCM 440

Availability
Round bar
Sizes: 10mm – 400mm

Chemical composition: ( % )

C Si Mn Cr Mo S\P Ni\Cu
0.38-0.45 0.15-0.40 0.60-0.90 0.90-1.20 0.15-0.30 0.035 0.03

Features
AISI 4140 is supplied in the hardened and tempered condition. The level of hardness is selected to give useful strength while still maintaining the ability to machine the material into finished components.
AISI 4140 can be re-heat-treated to higher strength or tempered back to lower strength levels than those supplied as standard. Assistance with heat treatment should be sought from reputable heat treatment companies.

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied :
Supplied Condition: Quenched & Tempered

Application
It’s mainly used for making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the abckshaft, the conncetingrob and the pinchock under the high pressure. Parts for power train applications, cold formed fastener components, shafts, gears, drill collars for the oil exploration, etc.

Product Machinery Steel:


Penelusuran terkait: Jual AISI4140,or equivalent Thyssen 7225, equivalent DIN 42CrMo4, Harga steel AISI 4140, or equivalent ASSAB 709, equivalent VCL140, standard JIS SCM 440, catalog AISI, Spesifikasi 4140, Properties of AISI 4140, Ukuran plat AISI 4140, agen plat AISI 4140, up to 3000mm width steel 4140, length 6m,

Jual AISI 4340 Steel Round Bar

Product : Steel AISI 4340
Kategori: Machinery Steel
Grades : High Tensile Nickel Chrome Steel

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent
Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, VCN 150, JIS SMCM 431,Atlas Ultimo 200,

Availability
Round bar

Chemical Composition:(%)

C Si Mn Cr Mo S\P Ni
0.38-0.43 0.20-0.35 0.60-0.80 0.70-0.90 0.20-0.30 0.040 Max 1.65-2.00

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Beyond Steel
CV. Far Beyond Energy
[Address] Jl. Permata 8 No.14 Tambun – Bekasi 17568
[Website] www.beyond-steel.com [Phone] +62-21 3293 5972
[Email] sales@beyond-steel.com [Fax] +62-21 8837 6742

Product Machinery Steel:

» Jual Steel S45C
» Jual AISI 1045 Steel
» Jual AISI 4140 Steel Round Bar
» Jual Steel VCL 140
» Jual DIN 42CrMo4 Steel
» Jual DIN 34NiCrMo6 Steel
» Beyond Steel Equivalent
» Associated Swedish Steels AB Grades
» Jual BÖhler Steel

Steel 6582

Product: Thyssenkrupp 6582

Kategori: High Tensile Nickel Chrome Steel

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent Thyssen 6582
AISI 4340, DIN 34NiCrMo6, ASSAB 705, VCN 150, JIS SMCM 431, Atlas Ultimo 200

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38-0.43 0.20-0.35 0.60-0.80 0.40 Max 0.04 Max 1.65-2.00 0.70-0.90 0.20-0.30

Mechanical Properties

Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Product Machinery Steel:

Harga SKD11 Tool Steel

Product  : SKD 11
Standard: JIS
Grade       : Cold Work Tool Steel

Characteristics SKD 11

SKD11 tool steel grades, trade name SLD (the latest improved version called SLD-MAGIC), the product called DC11 or SLD high wear-resistant chromium cold work tool steel or JIS G4404 (SKD11) / AISI D2

Chemical Composition SKD 11

C Si Mn Cr Mo V P S
1.5 0.25 0.45 12.00 1.00 0.35 0.025 0.01

Hardness
Soft annealing to about HB210 (Soft Annealed Approximately HB210)

Features
Common cold of high wear-resistant tool steel; quenching of the good, less heat deformation.

Advantages:

  • Was vacuum degassing refining, so the quality is very clean inside
  • Machining of good
  • Hardenability, good air cooling can be hardened without fear of quenching crack
  • Heat treatment deformation is very small, very small quenching deviation, the most suitable for precision mold
  • Very good wear resistance, the most suitable for stainless steel or high Die Hard Materials
  • Good toughness.

Application SKD 11
This steel is easy turning, and should be made sharp knife, scissors, saw, cold or hot for repair mode, the drum side, the screw pattern, line mode, cutters, impact mode, circular cylinder, the system of power transformers heart dies, cutting steel Paper mill knives, steel forming rollers, special molding roller, precision rules, shape complexity of the cold tools, mandrels, metallurgy, tin for mold, plastic mold, the screw head molds.

Related Tool Steel: