Stainless SUS 420J2 Beyond-steel Nusantara

Buat anda yang membutuhkan material baja SUS 420J2 Beyond-steel Nusantara adalah tempatnya. Beyond-steel Nusantara menjual aneka material baja industri dan konstruksi yang unik dan rada sulit dicari dipasaran. Contohnya adalah material baja SUS 420J2 ini.
Kebetulan beberapa waktu yang lalu kami membutuhkan material baja as SUS 420J2 untuk mengganti baja as mesin yang patah. setelah mencari kesana kemari dibeberapa toko baja yang kami hubungi memang tersedia material baja SUS 420J2 dimaksud, namun ukuran diameter yang kami butuhkan tidak ready stok. Contohnya di salah satu distributor produk-produk baja asal Jepang, menyediakan persamaan material baja SUS 420J2 tersebut namun ukuran paling besar yang ready stok adalah diameter luar 170mm (OD= outer diameter) sementara kami membutuhkan OD minimum 180mm. Material baja SUS 420J2 OD 180 cuma tersedia di Beyond-steel Indonesia, di distributor baja dan toko toko besi lain tidak tersedia

 

Persamaan Baja SUS 420 J2

Sekilas mengenai material baja SUS 420J2 adalah baja khusus yang menurut komposisi kimianya digolongkan kedalam stainless steel martensit. Persamaan material baja ini menurut brand pembuatnya antara lain: Assab RamaxS, Assab S-136, Assab RamaxLH, Assab RamaxHH, Aubert & Duval X13T6, Bestar BE2083, Bohler Stavax, Bohler Mirrax-40, Bohler M310, Buderus Edelstahlwerke ISO-B, Carrs Tool Steels P1008, Crucible CSM 420 XL, Deutsche Edelstahlwerke PKD, Eschmann-Stahl ES120K ESR, Eschmann-Stahl K45, Eschmann-Stahl ES120K, Ferlat Acciai 2083, Grimm Edelstahl BFR40, Hagener Gussstahlwerke WM40, Hitachi HPM38, Kind & Co RF, Kobelco Steel KTSM420, Latrobe Saxman6R, Lucchini Kaylos2083, Nippon Koshuha KSP1, Ossenberg BPS2, Platestahl BM260, Poldi AK4R, Sanyo QPD5, Schmidt+Clemens RH, Schmolz Bickenbach Formadur 2083, Stahlwerk Stahlschmidt Staro, Thyssen Edelstahl Thyroplast2083, Thyssenkrupp TES2083, Villares Metals VP420, Villares Metals VP420IM, WSM Werkzeugstahl WR413, Zapp C135M, 3Cr13. Wow ternyata banyak juga jenis persamaannya dengan baja merk lainnya ya, tapi entah kenapa begitu sulit untuk mencari outer diameter seperti yang kami sebutkan diatas.

 

Mechanical Properties SUS 420 J2

Baja SUS 420J2 menurut aplikasinya sebenarnya termasuk kedalam golongan Plastic Mould Steel dengan Tensile Strength dalam N/mm2 sebesar 540 – 655 untuk kondisi annealed, dimana dalam kondisi Full harden Tensile strength dapat mencapai 880 – 1030 N/mm2 .

Kekerasan material baja SUS 420J2 untuk kondisi annealed 150 – 200 HV, kekerasannya meningkat menjadi 280 – 320 HV jika di full harden.

 

Komposisi kimia SUS 420 J2

Komposisi kimia (Chemical Composition %) material baja SUS 420 J2 dibandingkan dengan HPM & 3Cr13 selengkapnya dapat dilihat disini:

Klik disini

Review Beyond-steel Nusantara

Review kami mengenai ketepatan waktu jadwal pengiriman barang (delivery order) Beyond-steel Nusantara patut diacungi jempol. Staf nya melayani dengan baik dan tulus, Pasalnya karena material SUS 420 J2 ini harus segera diproses (Urgent) dibengkel yang sudah kami tunjuk di daerah cikupa sehingga kami meminta agar material tersebut dapat di pick malam itu juga mengingat kami turun PO sudah sekitar pukul 4 sore, dan staf pengiriman barang melayani dengan sangat baik. Akhirnya baja SUS 420 J2 kami ambil sendiri malam itu juga sekitar pukul 8 malam,
Adapun kualitas material yang kami dapatkan sangat baik, outer diameter sesuai dan potongan nya juga lurus tidak melenceng. Kami kira kalau belanja kebutuhan material baja di Beyond-steel Nusantara adalah “sesuatu banget” pinjam istilahnya syahrini hehe….
Source: http://supplier-review.blogspot.co.id/

Chromium Molybdenum Steel JIS G 4105

JIS G 4105 : Chromium Molybdenum Steels

Jenis
Material
Chemical Composition %
C Si Mn P Max. S Max. Cr Mo
SCM 415 0.13∼0.18 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 418 0.16∼0.21 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 420 0.18∼0.23 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 421 0.17∼0.23 0.15∼0.35 0.70∼1.00 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 430 0.28∼0.33 0.15∼0.35 0.60∼0.85 0.030 0.030 1.00∼1.50 0.15∼0.30
SCM 432 0.27∼0.37 0.15∼0.35 0.30∼0.60 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 435 0.33∼0.38 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 440 0.38∼0.43 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 445 0.43∼0.48 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 822 0.20∼0.25 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30

Note : As impurities, Ni and Cu shall not exceed 0.25% and 0.30% respectively for all grades.

HSS SKH Steel Properties

Equivalent Grades

American
German
Japanese
China
(W.Nr)
(DIN)
(JIS G4403)
AISI M2
1.3343
HS6-5-2
SKH51
W6Mo5Cr4V2
AISI M35
1.3243
HS6-5-2-5
SKH55
W6Mo5Cr4V2Co5
AISI M42
1.3247
HS2-10-1-8
SKH59
W2Mo9Cr4VCo8
AISI T1
1.3355
HS18-0-1
SKH2
W18Cr4V
AISI T4
1.3255
HS18-1-2-5
SKH3
W18Cr4VCo5
AISI T5
1.3265
HS18-1-2-10
SKH4
W18Cr4VCo8
AISI T42
1.3207
HS10-4-3-10
SKH57

Chemical Composition (%)

 AISI
C
Si
Mn
Cr
Mo
V
W
Co
Ni
M2
0.78-0.88
0.20-0.40
0.20-0.40
3.75-4.50
4.50-5.50
1.60-2.20
5.50-6.75
M35
0.85-0.95
0.00-0.40
0.00-0.40
3.75-4.50
4.75-5.25
1.75-2.15
6.00-6.75
4.60-5.20
0.00-0.40
M42
1.05-1.15
0.15-0.65
0.15-0.40
3.50-4.25
9.00-10.00
0.95-1.35
1.15-1.85
7.75-8.75
 –
T1
0.65-0.75
0.20-0.40
0.20-0.40
3.75-4.50
 –
0.90-1.30
17.25-18.75
 –  –
T4
0.70-0.80
0.20-0.40
0.20-0.40
3.75-4.50
0.70-1.00
0.80-1.20
17.25-18.75
4.25-5.75
 –
T5
0.75-0.85
0.20-0.40
0.20-0.40
3.75-4.50
0.70-1.00
1.80-2.40
17.50-19.00
7.00-9.00
 –
T42
1.25-1.40
0.00-0.40
0.00-0.40
3.75-4.50
2.75-3.50
2.75-3.25
8.50-9.50
9.00-10.00
0.00-0.40

Ympress Plate

Description
Ympress is the brand name for the series of hot-rolled High-Strength Low-Alloy steel produced by TMCP (Thermal Mechanical Control Process). Through customer focus the Ympress range has been continuously improved and widened to match the increasing requirements of our customers. Ympress delivers high strength steel with consistent properties, excellent surface quality and high formability. To ensure an optimum match with standards, all grades have been designed to meet or exceed specifications conform EN 10149.

Ympress offer a wide range of strength levels between S315MC up to S700MC and a broad dimensional range with gauges between 1.5 and 20 mm and widths up to 2070 mm. Because of the wide dimensional range and the number of strength levels included in the Ympress brand, Ympress can be used for many applications ranging from construction profiles to crane booms.

Chemical Composition

C Mn Si P S Altot Nb V Ti Mo
Guaranteed ≤ 0.08 ≤ 1.90 ≤ 0.15 0.003 ≤ 0.05 ≤ 0.015 ≤ 0.09 ≤ 0.01 ≤ 0.15 ≤ 0.02
Typical CEV 0.35
Typical Pcm 0.16 (Japanese welding society standard)

Mechanical Properties

Thickness ReH in MPa Rm in MPa A80 in % Adp5 in %
Typical 2 – 3 mm 825 840 13
4 – 8 mm 800 845 19
8 – 10 mm 750 825 18
Guaranteed ≥ 690 750 – 950 ≥ 12 ≥ 14
Bend 0.5t for thickness ≤ 3mm
1t for thickness ≤ 6mm
1.5t for thickness > 6mm

Ympress Benefits

The consistency in chemical composition and production conditions provide the basis for the consistency in product properties of Ympress. Through its properties Ympress contributes to an optimum and efficient processing and high quality finished products.

  • Formability:
    The precise control of the sulphur content prevents the formation of MnS particles resulting in improved bending characteristics for Ympress. Even the use of a very small bending radius (0t) is possible for many strength levels. The guaranteed elongation levels are leading in the European industry.
  • Consistency:
    Ympress’ consistent properties and narrow gauge control ensure the same bending behaviour from sheet to sheet and from coil to coil. This reduces the intermediate setup times for tooling and increases efficiency.
  • Welding:
    The guaranteed low carbon equivalent allows Ympress to be welded trouble free with the commonly used welding methods. Pre- or post heating of the steel is therefore not necessary.
  • Galvanising:
    Most Ympress can directly be galvanised, the very low silicon content prevents the formation of surface defects by the Sandelin effect. For the highest strength levels E690TM and S700MC it is recommended to test the galvanising conditions first.
  • Laser cutting:
    For the optimisation of your laser cutting process we recommend the use of Ympress Laser. Ympress Laser is a superior product because of the low tensions in the material, the low silicon content and the extra high surface quality.
  • High surface quality:
    The low silicon content of all Ympress grades avoids the formation of so called ‘tiger stripes’ . The high quality surface can lead to fewer processing steps during manufacture.

Fabrication

The low carbon equivalent of Ympress makes it readily weldable and permits the use of high welding speeds. There is no need for pre-or post-welding treatment.

Adjacent to the weld a narrow Heat Affected Zone (HAZ) with a slightly decreased hardness is produced, however, with standard welding techniques this has no practical significance.

Tensile tests taken transverse to the weld show the same tensile strength as the parent material.

Stress relieving should be done in temperature ranges of 980° – 1080° F. Heating above this range reduces strength and should be avoided.

Application

Ympress combines high strength with excellent formability and weldability. It is used in applications such :

• Earth Moving Vehicles
• Large Cranes / Mobile Cranes
• Telescopic Booms

In these applications the high strength of steel is used to save weight and increase the load bearing capacity.

Product Wear Plates:

Harga Baja VCN

Steel VCN 150

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Harga Baja VCL

VCL 140 Steel Roundbar

Characteristics

Very common Quenched & Tempered alloyed engineering steel grade With high intensity, high hardenability. It has a small distortion afer quenching, a ghigh creep strength and lasting intensity afer processing of high tempreature.

Equivalent VCL 140

Thyssen 7225, DIN 42CrMo4, ASSAB 709, VCL140, JIS SCM 440, AISI 4140

Availability

Round bar
Sizes: 10mm – 400mm
Supplied Condition: Quenched & Tempered
Features
It’s one kinds of high quality alloy structural steel.
Chemical composition: ( % )
C : 0.38-0.45,
Si: 0.15-0.40,
Mn: 0.60-0.90,
Cr: 0.90-1.20,
Mo: 0.15-0.30
S\P=0.035,
Ni\Cu=0.030
Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied :
Application
It’s mainly used for making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the abckshaft, the conncetingrob and the pinchock under the high pressure. Parts for power train applications, cold formed fastener components, shafts, gears, drill collars for the oil exploration, etc.

Product Machinery Steel:

Jual AISI 4140 Steel Round Bar

Product : Steel AISI 4140
Kategori: Machinery Steel
Grades : Quenched & Tempered Alloyed Engineering Steel

Characteristics
AISI 4140 is a Chromium-Molybdenum through-hardening steel of medium hardenability. It is a general purpose high-tensile steel with medium strength level and good impact properties
Very common Quenched & Tempered alloyed engineering steel grade With high intensity, high hardenability. It has a small distortion afer quenching, a high creep strength and lasting intensity afer processing of high tempreature.

Equivalent
Thyssen 7225, DIN 42CrMo4, ASSAB 709, VCL140, JIS SCM 440

Availability
Round bar
Sizes: 10mm – 400mm

Chemical composition: ( % )

C Si Mn Cr Mo S\P Ni\Cu
0.38-0.45 0.15-0.40 0.60-0.90 0.90-1.20 0.15-0.30 0.035 0.03

Features
AISI 4140 is supplied in the hardened and tempered condition. The level of hardness is selected to give useful strength while still maintaining the ability to machine the material into finished components.
AISI 4140 can be re-heat-treated to higher strength or tempered back to lower strength levels than those supplied as standard. Assistance with heat treatment should be sought from reputable heat treatment companies.

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied :
Supplied Condition: Quenched & Tempered

Application
It’s mainly used for making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the abckshaft, the conncetingrob and the pinchock under the high pressure. Parts for power train applications, cold formed fastener components, shafts, gears, drill collars for the oil exploration, etc.

Product Machinery Steel:


Penelusuran terkait: Jual AISI4140,or equivalent Thyssen 7225, equivalent DIN 42CrMo4, Harga steel AISI 4140, or equivalent ASSAB 709, equivalent VCL140, standard JIS SCM 440, catalog AISI, Spesifikasi 4140, Properties of AISI 4140, Ukuran plat AISI 4140, agen plat AISI 4140, up to 3000mm width steel 4140, length 6m,