Harga Plat Bisalloy 80

Dear valued customers,
Beyond-Steel menjual plat bisalloy Grade 80 (Bis-80) import dengan ukuran dan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:
Tel  : +62-021-3293 5972
Fax : +62-021-8837 6742
Mobile: +62-0858 8044 6226
E-mail: sales@beyond-steel.com

Characteristic

Bis-80 is a high strength, low alloy steel plate with a yield stress three times of carbon steel and featuring low carbon, excellent notch toughness, good weldability and formability.

Fabrication

Bis 80 is a low alloy high stregthsteel manufactured with a controlled carbon equivalent for optimum weldability.

Bis 80 can be successfully welded to itself and a range of other steels, provided low hydrogen consumables are used and attention is paid to pre-heat, interpass temperature, heat input and the degree of joint restraint.

Stress relieving can be achieved at 540ºC – 570ºC. Heating above this temperature should be avoided to minimize any adverse effects on mechanical properties. Cold forming can be successfully conducted, provided due account is taken of the increased strength of the steel.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 690 MPa (Min)* 750 MPa
Tensile Strength 790-930 MPa* 830 MPa
Elongation in 50mm G.L 18%* 26%
Charpy Impact (longitudinal) +20ºC (10mm x 10mm) 40 J (Min)* 160 J
Hardness 255 HB

*Dependant on Plate Thickness

Chemical Composition

Thickness C P Mn Si S Cr Mo B CE
(IIW)*
CET*
5 – < 16 Maximum 0.18 0.025 1.5 0.25 0.008 0.25 0.25 0.002 0.40 0.29
>= 16 – 80 Maximum 0.20 0.025 1.5 0.25 0.008 0.30 0.25 0.002 0.50 0.35
> 80 – 100 Maximum 0.18 0.025 1.5 0.25 0.008 1.20 0.25 0.002 0.58 0.34

Application

• Transport Equipment ( Low Loaders )
• Mining Equipment (Longwall Roof Supports/ Dump Truck Tray )
• High Rise Building ( Columns )
• Induced Draft Fans
• Excavator Buckets
• Lifting Equipment ( Mobile Cranes / Container Handling Equipment )
• Bridges
• Storage Tanks

Product Wear Plates:

Iklan