Harga Baja VCN

Steel VCN 150

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Iklan

Harga AISI 1045 Steel

AISI 1045 Steel Roundbar

Characteristic
AISI 1045 Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
AISI 1045 Steel Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

Hardness
Brinell Hardness (HB) 160-220 (Annealed)

Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to: sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Harga Plat Deemex

Dear valued customers,
Beyond-Steel menjual plat DEEMEX Grade DMX 100, DMX 105, DMX 110 import, dengan ukuran dan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:
Tel  : +62-021-3293 5972
Fax : +62-021-8837 6742
Mobile: +62-0858 8044 6226
E-mail: sales@beyond-steel.com

Characteristic

DEEMEX Plates reduce maintenance and operating costs providing longer service life. The production line is suited in Greece (EU).We assure quality by analyzing the microstructure and chemical composition in every batch. All the production is fully automated and all raw materials are checked for purity and test certificates.

The finished product is checked for composition, carbide content, tolerances, crack dimension and straightness from fully equipped testing lab.

We deliver DEEMEX Plates with all certificates DIN 50049-2.2 for coating and EN 10204:2004-3.1 for base plates, according to EN ISO 9001:2008.

The newest production line of DEEMEX Plates employs PLC controlled systems ensuring uniform coating bead width and various welding shape imprints.
DEEMEX Plates outlast in high abrasion applications quench and tempered steels by up to 9 times and up to 42 times mild steel according to ASTM G65 -00 standard testing.

DEEMEX  SERIES
WEAR PLATES
C.
(%)
Cr.
(%)
OTHER
ELEMENTS
HARDNESS
ROCKWELL
PLATE THICKNESS
PLATE
COATING
DMX 100
2.7-4.3
17-29
Mn, B, Mo, Fe
50-56
≥4mm
≥3mm
≤10mm
DMX 105
4.1-5.1
30-32
Mn, B, Mo, Fe
56-60
≥4mm
≥3mm
≤10mm
DMX 110
4.9-5.5
32-35
Mn, B,  Mo, Fe
60-64
≥4mm
≥3mm
≤12mm
The Wear Plate Series (DMX100, DMX105, DMX110)
comes with Standard Base Material.

Related Wear Plates:

Steel 6582

Product: Thyssenkrupp 6582

Kategori: High Tensile Nickel Chrome Steel

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent Thyssen 6582
AISI 4340, DIN 34NiCrMo6, ASSAB 705, VCN 150, JIS SMCM 431, Atlas Ultimo 200

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38-0.43 0.20-0.35 0.60-0.80 0.40 Max 0.04 Max 1.65-2.00 0.70-0.90 0.20-0.30

Mechanical Properties

Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Product Machinery Steel:

Harga Steel S45C

Characteristic
Steel S45C is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
Steel S45C Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

S45C Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

S45C Hardness
Brinell Hardness (HB) 160-220 (Annealed)

S45C Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

S45C Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to:  sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Associated Swedish Steels AB Grades

Grades

Cold Work Steel  ASP 23
Cold Work Steel  ASP 30
Cold Work Steel  ASP 60
Cold Work Steel   88
Cold Work Steel   XW-10
Cold Work Steel   XW-41
Cold Work Steel   XW-42
Cold Work Steel   XW-5
Cold Work Steel  CARMO
Cold Work Steel  DF-3
Cold Work Steel  VANADIS 10
Cold Work Steel  VANADIS 4
Cold Work Steel  VANADIS 4

Hot Work Steel material  8407 2M
Hot Work Steel material  8407 SUPREME
Hot Work Steel material  DIEVAR
Hot Work Steel material  HOTVAR
Hot Work Steel material  QRO 90

Machinery Steel  grade 705/ 705M
Machinery Steel  grade 707
Machinery Steel  grade 709/ 709M
Machinery Steel  grade 7210M
Machinery Steel  grade 760

Plastic Mould Steel material  S136 Grade:DIN:1.4034/GB4Cr13
Plastic Mould Steel material  618
Plastic Mould Steel material  718HH
Plastic Mould Steel material  CALMAX
Plastic Mould Steel material  CORRAX
Plastic Mould Steel material  ELMAX
Plastic Mould Steel material  EM33
Plastic Mould Steel material  EM38
Plastic Mould Steel material  MOLDMAX LH/MM
Plastic Mould Steel material  MOLDMAX XL
Plastic Mould Steel material  Polmax
Plastic Mould Steel material  PRODAX
Plastic Mould Steel material  PROTHERM
Plastic Mould Steel material  RAMAX 2
Plastic Mould Steel material  STAVAX ESR
Plastic Mould Steel material  STAVAX Supreme