Harga Plat SM490 YA

Harga Plat SM490 YA

Kategori: Welded Structural Steel Plates
Material: SM490
Standard: JIS G3106
Grades: SM490 YA, SM490 YB

Characteristic:
Steel grade SM490 is a low carbon, high strength for weld structural steel. Easy for weld and good cold forming properties.

Availability:
Thickness: 6 – 60 mm
Size: 5′ x 20′ , 1524 x 6096mm

Chemical Composition: (%)

C Si Mn P S
0.18 Max 0.55 Max 1.60 Max 0.035 Max 0.035 Max

Note: other alloy elements may be added as necessary (Ni, Cr and Cu)

Equivalent Steel Grade
S 355 JR, AE 355 B, E 36-2, Fe 510 B, SS21,32,01, IS 961, A633 Gr.A,C,D, 50 B

Mechanical Properties:
Yield Strength      t≦16    (Min Mpa) :  365
Yield Strength 16≦t≦25 (Min Mpa) :  325-355
Tensile Strength (Mpa)      :   490-610
Elongation t≦16          (Min %) :   15
Elongation 16≦t≦25 (Min %)  :  21

Application:
Machinery parts, mobile equipment, crane, boom, chassis, buildings, bridges and most structural activities.

Lebih Detail »

 

Harga Baja VCN

Steel VCN 150

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Harga AISI 1045 Steel

AISI 1045 Steel Roundbar

Characteristic
AISI 1045 Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
AISI 1045 Steel Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

Hardness
Brinell Hardness (HB) 160-220 (Annealed)

Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to: sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Jual Plat Stainless Steel

Our valued customers yang budiman, salam sejahtera!
Semoga hari ini anda selalu sehat dan diberkati.
Kami menjual plat stainless steel Grade 201, 304, 316L, 430, dengan finish 1B, 2B, BA, Mirror, HL, No.4 dengan ketebalan mulai dari  0.3 mm  s/d  12 mm. Untuk informasi stock dan harga silahkan hubungi kami

Characteristic

Plat Stainless Steel (Stainless steel sheet plate) adalah suatu jenis baja lembaran (sheet) dengan kemampuan daya ketahanan tarik dan ketahanan karat yang sangat tinggi dan memiliki banyak keunggulan, sehingga plat stainless banyak di butuhkan oleh industri besar , menengah, maupun kecil di Indonesia.

Beberapa Industri yang sering menggunakan plat stainless steel diantaranya: industri otomotif, perlengkapan rumah tangga/ dapur, konstruksi dan infrastruktur untuk dekorasi gedung2 kantor dan hotel, untuk lift dan elevator serta industri lainnya.

Sebagian besar plat stainless dapat di potong, ditekuk, di las,  dibentuk dan diproses dengan mesin secara mudah, di Bor/dipotong dengan ukuran yang disesuaikan dengan kebutuhan dan lain-lain.

Availability

Plat stainless steel yang umum tersedia terdiri dari beberapa grade yaitu :

Plat Stainless steel Grade 304, finish 1B, 2B, BA, Mirror, HL, No.4
Plat Stainless steel Grade 201/202, finish 1B, 2B, BA, Mirror, HL, No.4
Plat Stainless steel Grade 430, finish 2B, BA
Plat Stainless steel Grade 316, finish 1B, 2B, dan yang lainnya.

Plat stainless steel tersedia dalam ukuran : 1,219 mtr x 2,438 mtr (4×8 feet)

Ketebalan Plat stainless steel yang tersedia : dari 0.3 mm  s/d  12 mm.

Shape Size Grade
Rounds 1/8″ – 24″ 303, 304, 304L, 316, 316L, 321, 347, 410, 416, 440C, 17-4 PH, 15-5 PH
Flats 1/8″ x 1/2″
to 3″ x 8″
303, 304, 304L, 316, 316L, 321, 347, 410, 416, 440C, 17-4 PH, 15-5 PH
Sheets 36″ x 96″ to
60″ x 144″
7 ga. to 24 ga.
304, 304L, 316, 316L
Squares 1/8″ – 6″ 303, 304, 304L, 316, 316L, 321, 347, 410, 416, and 440C
Hexagons 1/4″ to 4″ 303, 304, 304L, 316, 316L, 321, 347, 410, 416
HRAP Angles 3/4″ x 3/4″ x 1/8″
to 6″ x 6″ x 1/2″
304, 304L, 316, 316L
Rectangular
Tubing
1/2″ x 1″ x .065″ wall
– 6″ x 12″ X 1/2″ wall
304, 304L, 316, 316L
Square Tubing 1/2″ x .065″ wall
– 12″ x 1/2″ wall
304, 304L, 316, 316L
Half Rounds 1/2″ – 1″ 304, 304L, 316, 316L
Pipe Various 304, 304L, 316, 316L

Tabel ukuran dan Berat Plat stainless steel :

Stainless Steel Ukuran Berat (Kg)
Plate 1 mm x 4′ x 8′ 23.6 Kg
Plate 2 mm x 4′ x 8′ 47.2 Kg
Plate 3 mm x 4′ x 8′ 70.8 Kg
Plate 4 mm x 4′ x 8′ 94.4 Kg
Plate 5 mm x 4′ x 8′ 118 Kg
Plate 6 mm x 4′ x 8′ 141.6 Kg
Plate 8 mm x 4′ x 8′ 188.8 Kg
Plate 10 mm x 4′ x 8′ 236 Kg
Plate 12mm x 4′ x 8′ 283.2 Kg
Lebih Detail »
Steel Plate Product:

Harga Plat Durinox F12N-304

Dear valued customers,

Beyond-Steel menjual plat Durinox stainless steel Grade import dengan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:
Tel  : +62-021-2986 1684
Fax : +62-021-2986 1684
Mobile: +62-0818 0817 1467
E-mail: sales@beyond-steel.com

Characteristic

DURINOX ™ is developed mainly for the agricultural industries where corrosion and abrasion are often the major source of cost and quality problems.

Durinox™ is a registered trademark of Beyond-steel covering a range of ferritic stainless steel grades.

Durinox™ offers superior and low-cost solution to carbon steels and, in many cases, to austenitic stainless steels.

Durinox™ is developed mainly for the agricultural industries where corrosion and abrasion are often the major source of cost and quality problems. It is also often the case that many of the plants in agricultural industries were originally designed with carbon steels because of its low cost. In many cases, this proved a false
economy, since carbon steel performs poorly against corrosion and abrasion.

Durinox™ stainless steels is an excellent choice for agricultural industries as it is both chemically inert in contact with food and produce and also biologically inert which reduce the risk of micro-organism colony growth.

Durinox™ offers the following benefits compared to austenitic stainless steels and carbon steel:

  • Similar thermal expansion to carbon steel and lower compared to austenitic stainless steels, and there-
    fore it distort less when heated
  • Thermal conductivity that is much higher than austenitic stainless steels
  • High temperature oxidation resistance, they are less prone to scaling
  • Its mechanical properties are very similar to carbon steel making it easy to cut and work without the need of specialized tools. They are also less prone to spring back compared austenitic stainless steels
  • It is not prone to stress corrosion cracking
  • They can be used in temperatures to up to 600°C which is far better than carbon steel and is more than
    sufficient for most agricultural industries

Availability

Plat Durinox™ F12N is available as hot rolled sheet and plates with no. 1 (as rolled) finish.

Product Thickness Size (WxL)
Plat Durinox 1.6 mm x 1500 x 6000 mm
Plat Durinox 2 mm x 1500 x 6000 mm
Plat Durinox 3 mm x 1500 x 6000 mm
Plat Durinox 4 mm x 1500 x 6000 mm
Plat Durinox 5 mm x 1500 x 6000 mm
Plat Durinox 6 mm x 1500 x 6000 mm
Plat Durinox 8 mm x 1500 x 6000 mm
Plat Durinox 10 mm x 1500 x 6000 mm
Plat Durinox 12 mm x 1500 x 6000 mm
Plat Durinox 16 mm x 1500 x 6000 mm
Plat Durinox 20 mm x 1500 x 6000 mm
Plat Durinox 25 mm x 1500 x 6000 mm

Mechanical Properties

Grade Tensile
Strength
(MPa) min
Yield
Strength
(MPa) min
Elongation
(%)
min
Hardness
Brinell
(HB) min
Cold Bend
Transverse direction
Bend radius = 1T
F12N 455 275 18 220
SUS 304 515 250 40 200 180°
Mild Steel 375 250 20 180 180°

Chemical Composition

C Mn Si P S Cr Ni
0.03 0.15 1.00 0.025 0.005 10.5 – 12.5 0.3 – 1.0

Physical Properties

Grade Density
(g/cm3)
Average thermal
expansion
Coefficient from
0°C to
Thermal
Conductivity
100oC
(W.m.K)
Electrical
resistivitynΩ.m
Specific
Heat(j/kg.oK)
Young
Modulus
(GPa)
100°C
µ/m.°C
538°C
µ/m.°C
F12N 7.7 10.8 11.9 23 580 460 220
SUS 304 8.0 17.2 18.4 16.2 720 500 193
SUS 316 8.0 15.9 17.5 16.2 740 500 193
Mild Steel 7.8 12.2 14.3 57.8 142

Related Stainless Steel:

Creusabro 4800 & 8000

Characteristic

For wear and tear which is not only caused by impact and friction, we provide CREUSABRO 4800 and CREUSABRO 8000. These products have TRIP (Transformation Induced by Plasticity) character and micro carbides that make this product have an active surface resistance, so that this material can last better if there is an impact. This product o can also be used in medium temperature 250–450 C, where other resistance product which generates from water quenched process usually will not be functioning optimally.

Creusabro 4000
The new Creusabro concept-excellent ability to work harden and contribution of micro carbides-gives Creusabro 4000 high wear resistance, on average 4 times higher than ordinary mild steel and 30 % higher than conventional 4000 BHN water quenched steel.

To ease in fabricating, Creusabro 4000 is supplied by approximately 360 HB hardness. After the fabrication, the hardness of Creusabro 4000 can be reach 420 HB.

Chemical Composition:

C : 0.20 max
Mn : 1.40
Cr : 0.85 min
Mo : 0.10 min
Ni : 0.30
S : 0.010 max
P : 0.018 max

Applications:
Mines: Extractors, Unloaders, Spiral Chutes. Crusher, Grinders, Screens, Conveyor
Quarries and Construction Earth Moving: Shovels, Diggers, Graders, Bulldozers, Dumpers, Dredging machines, Crushers, Grinders, Screens, Hoppers, Mixers, Molds for concrete aggregates
Cement Plants, Refractory Products: Crushers, Hoppers, Chutes, Cyclone, Wheel Excavator Buckets Metallurgical Plant, Scrap recovery, etc

The Creusabro concept-excellent ability to work harden and the supplementary contribution of microcarbides, already used in Creusabro 4000 has been improved in the Creusabro 8000. this grade takes advantage of an additional metal working process: the TRIP effect (Transformation Induce by Plasticity). The combination of this properties give to the Creusabro 8000 an exceptional wear resistance in heavy plates with uniform properties throughout the thickness around 8 times that of the standard mild steel (A572 G65 grade). The properties in extreme conditions are 50% superior to standard water quenched steel (hardness 500HB).

Creusabro 8000

Creusabro 8000 is supplied with the hardness of 420 HB in order to easy the fabrication. After fabrication, the hardness of Creusabro 8000 can reach 540 HB.

Chemical Compositions:
C Mn Cr Mo Ni S P
0.280 max 1.60 max 1.60 max 0.20 min 0.40 0.005 max 0.015 max

Applications:

Mines, Coal mines: Extracting and load equipment, Hopper lateral liner plate, Helical gravity conveyor.
Quarries and Construction Earth Moving: Blades, Outside Stiffeners, Under teeth pads of loaders and shovel dippers, Crushers and Mills lateral armor plate, Feed crown-wheel, Sprocket-wheal.
Cement Plants: Liners for drier-tubes, Buckets, Hoppers, Clinker cooler outlet shields.
Iron and Steel Industry: Scrap recovery, Brick works, Agricultural equipment, etc.

beyond-steel indonesia, distributor creusabro indonesia jual creusabro, ukuran creusabro,harga creusabro,diameter creusabro,dia. creusabro,beli creusabro,distributor creusabro,tebal creusabro,berat creusabro,pabrik creusabro, stockist creusabro,grade creusabro, suplier creusabro,chemical composition creusabro, equivalent of creusabro, mechanical properties creusabro, physical properties creusabro, properties of creusabro, hrc creusabro,thickness creusabro, hardness creusabro

Plat FORA 400

Characteristic

FORA 400 is a water quenched maternistic steel, with a typical hardness of 400HB (42,5HRC), constituting a real answer to abrasive wear. Thanks to its toughness, its elevated hardness, its high yield strength, FORA 400 can be use wherever a wear resistance to wear by sliding or by moderate impacts is required. Moreover, FORA 400 is very easily welded and has a good forming properties thereby contributing to ease of fabrication.

Compared to conventional steels, such as S355, FORA 400 offers a real benefit to the equipment life times and permits a signifiant reduction in he design thickness since its wear resistance is up to 3 times longer than S355 grade.

Moreover, FORA 400 is very easily welded and has a good forming properties thereby contributing to ease of fabrication. This steel is particulary suitable for applications in quarries, construction industry, mines, cement plants, the iron and steel industry, etc.

Chemical Composition
C Mn Cr Mo S max P max
0.13 1.2 0.5 0.25 0.01 0.02

Applications
Quarries and Construction Earth Moving: Skimmers, crushers, screens, bunkers, bulldozers, etc.
Cement Plants: Buckets, crushers, bunkers, etc.
Mines, Coal mines: Excavator, winding and discharging machines, conveyors, etc.
Iron and steel industry: Bunkers, various casing, guide and shifting plates, etc.

Beyond-Steel Indonesia, distributor FORA 400 Indonesia jual FORA 400, ukuran FORA 400,harga FORA 400,diameter FORA 400,dia. FORA 400,beli FORA 400,distributor FORA 400,tebal FORA 400,berat FORA 400,pabrik FORA 400, stockist FORA 400,grade FORA 400, suplier FORA 400,chemical composition FORA 400, equivalent of FORA 400, mechanical properties FORA 400, physical properties FORA 400, properties of FORA 400, hrc FORA 400,thickness FORA 400, hardness FORA 400

Related Wear Plates: