Harga Plat Mild Steel ASTM A-36

Characteristic

Mild Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications. Mild Steel Plate ASTM A-36 is one of the most commonly used hot rolled general structural steel. Typical carbon steel materials, they are very cheap, excelling in weldability & machinability and they can be subjected to various heat treatments.

Availability
Supplied as plates, sheets, flats, bars, sections, etc.
Plate Thickness: 4.5 mm, 6 mm, 8 mm, 10 mm dan 12 mm
Size: 5′ x 20′ , 6′ x 20′ , 4′ x 8′
Size: Thickness x Width x Length

Specifications
Grade: ASTM A36, AISI A-36
Workability: Easy to Weld, Cut, Form and Machine

Mechanical Properties

  • Density (kg/m3): 7860
  • Young’s Modulus (GPa): 190-210
  • Tensile Strength (MPa): 400 – 510 MPa
  • Yield Strength (MPa): 205-245 MPa
  • Poisson’s ratio: 0.26
  • Brinell Hardness (HB) 160

Equivalents
DIN Equivalents for JIS SS400: 17100 St 44-2
ASTM Equivalents for JIS SS400: ASTM A36, ASTM A283 Grade D
EN Equivalents for JIS SS400: EN S275/ BS 43A

Chemical Composition (%)
Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.

Tabel Ukuran & Berat Nominal Plat ASTM A-36:
Product Thickness (mm) Standard Sheet Size Weight per square metre
Mild Steel Plate 3mm 3.00 1200 x 2400mm (1.2 x 2.4m) 23.55
Mild Steel Plate 4mm 4.00 1200 x 2400mm (1.2 x 2.4m) 31.4
Mild Steel Plate 5mm 5.00 1200 x 2400mm (1.2 x 2.4m) 39.25
Mild Steel Plate 6mm 6.00 1200 x 2400mm (1.2 x 2.4m) 47.1
Mild Steel Plate 8mm 8.00 1200 x 2400mm (1.2 x 2.4m) 62.8
Mild Steel Plate 10mm 10.00 1200 x 2400mm (1.2 x 2.4m) 78.5
Mild Steel Plate 12mm 12.00 1200 x 2400mm (1.2 x 2.4m) 94.2
Mild Steel Plate 16mm 16.00 1200 x 2400mm (1.2 x 2.4m) 125.6
Mild Steel Plate 20mm 20.00 1200 x 2400mm (1.2 x 2.4m) 157
Mild Steel Plate 25mm 25.00 1200 x 2400mm (1.2 x 2.4m) 196.25
Melting Point
Melting point of SS400 is 1430 Degree Celsius
Applications:
base plates, gussets, liners, road plates, trench covers, etc.

Related Carbon Steel:

Iklan

DC53 Cold Work Die Steels

Description
DC53 is a general purpose cold work tool steel with exceptional Toughness, Wear Resistance, Compressive Strength and Temper Resistance.

Features
Uniform distribution of fine carbides
Excellent galling & wear resistance
Exceptional toughness & fatigue resistance
High temper resistance to support PVD & nitride surface treatments
Machining & grinding characteristics superior to most other tool steels

These properties are obtained through its chemistry as well as its unique manufacturing processes of ladle refinement, vacuum degassing and forging methods. DC53 also has excellent machining characteristics and is well suited as a sub-straight for PVD surface treatments. DC53 can also be hot process CVD and TD (Thermal Diffusion) coated however post heat treat is generally recommended.

Availability
Rounds 1/4″ to 20″
Flats 1/2″ to 12″ thick in widths up to 24″

Chemical Composition (%)

C Si Mn Cr Mo V
0.95 1.00 0.40 8.00 2.00 0.30

Mechanical Properties

Annealed Hardness (BHN): 210 – 225
Specific Gravity (g/Cm3): 7.76
Density (lb/Inch3) : ,2793
Young’s Modulus (E) : 21,700
Modulus of Rigidity (G) : 8,480
Poisson’s Ratio : 0.28

Fabrication Characteristics

Machining

DC53 can typically be machined 20% to 40% faster than D2 while experiencing as much as 50% less tool wear and breakdown.

Faster feeds and speeds reduce machining cost and yielding an improved surface finish.

Wire EDM

DC53 was initially developed with the Wire EDM process in mind. The high temperature double draw 520° C (970° F) or higher was part of the development criteria in determining alloy content, and heat treat requirements for DC53. This high temperature double temper relives a considerable amount of stress in the steel which in turn minimizes movement in the part when Wire EDM cutting hardened DC53. Click here for more information.

Welding

With special care DC53 can be welded. Use any appropriate weld rod such as an H72A rod which is commonly used for high carbon, high chrome die steels similar to D2. The weld rod should be dry to prevent bubble cracks in the weld. Placing the rod in a 350 degrees Celsius (650 degrees Fahrenheit) oven for one hour is generally sufficient.

Applications
Punches & dies, Draw & forum dies, Shear blades, Shredder knives, Thread & form rolls, Cold heading dies, Mill rolls & slitters

Product  Tool Steel:

Plat Boiler ASTM A-516 Gr.70

Characteristic

The ASTM A 516 carbon steel is widely used in various pressure applications of many industries.

Beyond-steel Indonesia provide steel plates in ASTM A 516 standard that includes carbon steel plates. Our range is primarily used in welded pressure vessels where improved notch toughness is required. The steel plates allow four different strength levels and the most common is grade 70. This grade is made to a fine grain particle size to meet the requirement of varied industry applications. Our steel plates are HIC tested.

Features:

Uniform surface
High tensile strength
Corrosion resistance
Sturdy construction
Temperature resistance

Tabel Ukuran, Berat Nominal dan Harga Plat ASTM A 516 Gr.70

Size Plate Weight (Kg)  Price
3/16″ x 5′ x 20′ = 347 Kg
1/4″ x 5′ x 20′ = 463 Kg
5/16″ x 5′ x 20′ = 579 Kg
3/8″ x 5′ x 20′ = 694 Kg
7/16″ x 5′ x 20′ = 810 Kg
1/2″ x 5′ x 20′ = 926 Kg
9/16″ x 5′ x 20′ = 1042 Kg
5/8″ x 5′ x 20′ = 1158 Kg
3/4″ x 5′ x 20′ = 1389 Kg
1′ x 5′ x 20′ = 1852 Kg

Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Carbon Steel:

Plat Kapal

Characteristic

JIS 3101 SS-400, known as SS400, in the ASME Code Section II-A & JIS specifications of steel plates for general structure included in the category of SA-36. In JIS (Japanese Industrial Standard) “SS” stands for structural steel and 400 grade which is similar to AISI 1018. SS400 is one of the most commonly used hot rolled general structural steel. Typical carbon steel materials, they are very cheap, excelling in weldability & machinability and they can be subjected to various heat treatments.
Availability
Supplied as plates, sheets, flats, bars, sections, etc.
Plate Thickness: 4.5 mm, 6 mm, 8 mm, 10 mm dan 12 mm
Size: 5′ x 20′ , 6′ x 20′ , 4′ x 8′

Mechanical Properties

  • Density (kg/m3): 7860
  • Young’s Modulus (GPa): 190-210
  • Tensile Strength (MPa): 400 – 510 MPa
  • Yield Strength (MPa): 205-245 MPa
  • Poisson’s ratio: 0.26

Hardness
Brinell Hardness (HB) 160

Equivalents
DIN Equivalents for JIS SS400: 17100 St 44-2
ASTM Equivalents for JIS SS400: ASTM A36, ASTM A283 Grade D
EN Equivalents for JIS SS400: EN S275/ BS 43A
Chemical Composition
As per JIS G 3101, Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.
Melting Point
Melting point of SS400 is 1430 Degree Celsius
Table Ukuran dan Berat Nominal dan Harga Plat Besi:
Thick
 (mm) WxL (feet)  Weight  Price Rp
1.2 mm x 4×8 28 Kg
1.35 mm x 4×8 31.5 Kg
1.4 mm x 4×8 33 Kg
1.5 mm x 4×8 35 Kg
1.6 mm x 4×8 37.5 Kg
1.8 mm x 4×8 42 Kg
1.9 mm x 4×8 45 Kg
2 mm x 4×8 46.7 Kg
2.1 mm x 4×8 49 Kg
2.3 mm x 4×8 54 Kg
2.5 mm x 4×8 58.3 Kg
2.6 mm x 4×8 60.7 Kg
2.8 mm x 4×8 65.3 Kg
2.9 mm x 4×8 67.7 Kg
3 mm x 4×8 70 Kg
3.2 mm x 4×8 74.7 Kg
3.6 mm x 4×8 84 Kg
3.8 mm x 4×8 88.7 Kg
4 mm x 4×8 93.32 Kg
4.5 mm x 4×8 105 Kg
4.8 mm x 4×8 112 Kg
5 mm x 4×8 117 Kg
5.8 mm x 4×8 135.32 Kg
6 mm x 4×8 140 Kg
8 mm x 4×8 187 Kg
9 mm x 4×8 210 Kg
10 mm x 4×8 233.3 Kg
11 mm x 4×8 256.62 Kg
12 mm x 4×8 280 Kg
13 mm x 4×8 303.3 Kg
14 mm x 4×8 326.62 Kg
15 mm x 4×8 350 Kg
16 mm x 4×8 373 Kg
18 mm x 4×8 420 Kg
19 mm x 4×8 443.3 Kg
20 mm x 4×8 467 Kg
21 mm x 4×8 490 Kg
22 mm x 4×8 513.3 Kg
24 mm x 4×8 560 Kg
25 mm x 4×8 583.3 Kg
28 mm x 4×8 653.24 Kg
30 mm x 4×8 700 Kg
31 mm x 4×8 723.3 Kg
32 mm x 4×8 747 Kg
38 mm x 4×8 887 Kg
40 mm x 4×8 933.2 Kg
42 mm x 4×8 980 Kg
45 mm x 4×8 1050 Kg
50 mm x 4×8 1167 Kg
65 mm x 4×8 1516.5 Kg
75 mm x 4×8 1750 Kg
80 mm x 4×8 1870 Kg
85 mm x 4×8 1983.1 Kg
90 mm x 4×8 2100 Kg
100 mm x 4×8 2333 Kg