Jual Plat Bisclad600, Bisclad650 & 700

Description
Bisclad is a chromium carbide clad mild steel plate offering outstanding wear life for areas subject to sliding abrasion wear.

Chemical Composition

Grade C
%
PCM
(IIW)
600 4.2 36
650 3.5 – 4.2 20 – 25
750 4.8 – 5.5 29 – 32

Fabrication

Bisclad can be rolled, bent, weld use low hydrogen 7018 electrode and cut with plasma arc. All cutting should be from the mild steel side, otherwise chromium and carbon will contaminate mild steel base and cause a brittle weld.

Bisclad can be supplied with the following means of attachment:

• Plug weld holes
• Stud welded studs to mild steel
• Countersunk holes

Mechanical Properties

Properties Grade Typical
Hardness 600
650
750
600 BHN (57 HRc)
650 HV
750 HV

Application

• Wear plates for draglines
• Shovel
• Hopper
• Skid Plates
• Chutes
• Deflector
• Slurry Pipes
• Dust Pipes

Product Carbon Steel:

Harga Plat Mild Steel ASTM A-36

Characteristic

Mild Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications. Mild Steel Plate ASTM A-36 is one of the most commonly used hot rolled general structural steel. Typical carbon steel materials, they are very cheap, excelling in weldability & machinability and they can be subjected to various heat treatments.

Availability
Supplied as plates, sheets, flats, bars, sections, etc.
Plate Thickness: 4.5 mm, 6 mm, 8 mm, 10 mm dan 12 mm
Size: 5′ x 20′ , 6′ x 20′ , 4′ x 8′
Size: Thickness x Width x Length

Specifications
Grade: ASTM A36, AISI A-36
Workability: Easy to Weld, Cut, Form and Machine

Mechanical Properties

  • Density (kg/m3): 7860
  • Young’s Modulus (GPa): 190-210
  • Tensile Strength (MPa): 400 – 510 MPa
  • Yield Strength (MPa): 205-245 MPa
  • Poisson’s ratio: 0.26
  • Brinell Hardness (HB) 160

Equivalents
DIN Equivalents for JIS SS400: 17100 St 44-2
ASTM Equivalents for JIS SS400: ASTM A36, ASTM A283 Grade D
EN Equivalents for JIS SS400: EN S275/ BS 43A

Chemical Composition (%)
Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.

Tabel Ukuran & Berat Nominal Plat ASTM A-36:
Product Thickness (mm) Standard Sheet Size Weight per square metre
Mild Steel Plate 3mm 3.00 1200 x 2400mm (1.2 x 2.4m) 23.55
Mild Steel Plate 4mm 4.00 1200 x 2400mm (1.2 x 2.4m) 31.4
Mild Steel Plate 5mm 5.00 1200 x 2400mm (1.2 x 2.4m) 39.25
Mild Steel Plate 6mm 6.00 1200 x 2400mm (1.2 x 2.4m) 47.1
Mild Steel Plate 8mm 8.00 1200 x 2400mm (1.2 x 2.4m) 62.8
Mild Steel Plate 10mm 10.00 1200 x 2400mm (1.2 x 2.4m) 78.5
Mild Steel Plate 12mm 12.00 1200 x 2400mm (1.2 x 2.4m) 94.2
Mild Steel Plate 16mm 16.00 1200 x 2400mm (1.2 x 2.4m) 125.6
Mild Steel Plate 20mm 20.00 1200 x 2400mm (1.2 x 2.4m) 157
Mild Steel Plate 25mm 25.00 1200 x 2400mm (1.2 x 2.4m) 196.25
Melting Point
Melting point of SS400 is 1430 Degree Celsius
Applications:
base plates, gussets, liners, road plates, trench covers, etc.

Related Carbon Steel:

Catalog Wear Plates

Kami Menjual Wear Plate dengan berbagai type dan ukuran. Plat hardox,FORA, Creusabro, XAR, Brinar, JFE Everhard, Sumihard,etc,Ukuran 4×8 feet, 1500x3000mm,juga potongan. Untuk informasi pemesanan dan harga silahkan hubungi kami klik disini

Wear Plate Brand & Spesification

ABRAZO: 400, 450 & 500
beyond-steel.blogspot.com/2012/04/jual-plat-fora.html
FORA 400 is a water quenched martensitic steel, with a typical hardness of 400HB (42,5 HRC), constituting a real answer to abrasive wear. Thanks to its toughness, its elevated hardness, its high yield strength, FORA 400 can be used wherever a wear resistance to wear by sliding or by moderate impacts is required …
BISALLOY: 80, 400, 450 & 500
beyond-steel.blogspot.com/2011/06/catalog-bisalloy-beyond-steel-indonesia.html
BISALLOY 80 is a high strength, low alloy steel plate with a yield stress three times of carbon steel and featuring low …
BRINAR 500
indonetwork.co.id/beyond-steel/3534810/plat-hardox-400.htm
Plat Hardox 400 for Dumptrucks. By Beyond Mining Equipment on 2012/02/23. Source: Beyond steel Indonesia. Description. Hardox 400 has a typical hardness …
CREUSABRO: 4000, 4800 & 8000
beyond-steel.blogspot.com/2012/04/jual-creusabro.html
The new Creusabro concept-excellent ability to work harden and contribution of micro carbides-gives Creusabro 4000 high wear resistance, on average 4 times higher than ordinary mild steel and 30 % higher than conventional 4000 BHN water quenched steel …
DILLIDUR: 400V, 450V & 500V
steel-indonesia.blogspot.com/2012/03/jual-jfe-eh-400-abrasion-resistant.html
12 Mar 2012 – Abrasion Resistant Plates JFE Everhard JFE-EH 400 is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate…
DILLIMAX 690
steel-indonesia.blogspot.com/2012/04/jual-weldox-700.html
Weldox steels in welded structures, the loadbearing capacity can be increased, while production costs can be cut due to the reduced plate weight and the lower material costs…
DOMEX: Wear 400, 460MC & 700MC
jualbesibaja.wordpress.com/2009/06/09/jual-deemex-plates/
DEEMEX Plates reduce maintenance and operating costs providing longer service life. The production line is suited in Greece (EU).We assure quality by analyzing the microstructure and chemical composition in every batch…

Wear Plate Brands and Type

Product Brand Product Brand
ABRAZO 400 JFE EVERHARD EH360LE
ABRAZO 450 JFE EVERHARD EH400
ABRAZO 500 JFE EVERHARD EH500
BISPLATE 80 JFE EVERHARD EH500LE
BISPLATE 400 LAS07/LSLAS07
BISPLATE 450 MILUX 400
BISPLATE 500 MILUX 500
BRINAR 500 NAXTRA 700
CREUSABRO 4000 NICRODUR 400
CREUSABRO 4800 NICRODUR 450
CREUSABRO 8000 NICRODUR 500
DILLIDUR 400V OPTIM700
DILLIDUR 450V QUARD
DILLIDUR 500V QUARD 400
DILLIMAX 690 QUARD 500
DOMEX RAEX 400
DOMEX 460 MC RAEX 450
DOMEX 700MC RAEX 500
DOMEX WEAR 400 SAILHARD
DUROSTAT 500 SUMIHARD K340
FORA 400 SUMIHARD K400
FORA 450 SUMIHARD K500
FORA 500 WELDOX
HARDOX 400 WELDOX 1100
HARDOX 450 WELDOX 1300
HARDOX 500 WELDOX 700
HARDOX 600 WELDOX 900
HARDOX EXTREME WELDOX 960
HARDOX HITUF XAR 400
JFE EVERHARD 780LE XAR 450
JFE EVERHARD EH360 YMPRESS

Aplication

crushers, chutes, cyclones, excavator buckets, gravel & stone conveying plants (routes, chutes, hoppers) & crushing plants. Shovels, diggers, graders, bulldozers, dumpers, dredging machines, crushers, grinders, screens, hoppers, mixers, moulds for concrete aggregates. Wear resistance plates for mining machinery. Extractors, unloaders, spiral chutes, crushers, grinders, screens, conveyors. Abrasion-resistant steel plates for Cement Plants & Refractory Product Plants: hoppers