Jual Quend 700

Description
Quend 700 is extra high strength structural steel produced as quenched and tempered with a minimum yield strength of 700 MPa. Quend 700 complies with the requirements corresponding to the S690QL given in the EN 10025-6 standard, where impact toughness is guaranteed at -40 °C.

Availability
Quend 700 is currently supplied in the following range:
• thickness: 8 – 25 mm
• width: 1500 – 3000 mm

Chemical Composition (%)

C Si Mn Cr Mo P Ni S B Nb V Ti Al N
 0.20 0.60 1.50 0.60 0.50 0.020 1.00 0.010 0.005 0.040 0.070 0.040 0.070 0.014

Mechanical Properties
Hardness (HBW) : 370 – 430
Charpy-V notch : 35 J
impact test (longitudinal at -40 °C)
Yield Strength (MPa): 700 Min
Tensile Strength (MPa): 780 – 930
Elongation (%): 14

Cutting
Quend 700 may be cut either by oxygen fuel, plasma and laser cutting without any restrictions

Welding
Welding of Quend 700 can be performed using any of the conventional welding methods available both as manual or automatic.

Application
Quend 700 is recommended for the following applications:
• truck chassis
• lifting and hoisting equipment
• handling equipment
• trailers

Related Carbon Steel:

Iklan

Harga Plat Mild Steel ASTM A-36

Characteristic

Mild Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications. Mild Steel Plate ASTM A-36 is one of the most commonly used hot rolled general structural steel. Typical carbon steel materials, they are very cheap, excelling in weldability & machinability and they can be subjected to various heat treatments.

Availability
Supplied as plates, sheets, flats, bars, sections, etc.
Plate Thickness: 4.5 mm, 6 mm, 8 mm, 10 mm dan 12 mm
Size: 5′ x 20′ , 6′ x 20′ , 4′ x 8′
Size: Thickness x Width x Length

Specifications
Grade: ASTM A36, AISI A-36
Workability: Easy to Weld, Cut, Form and Machine

Mechanical Properties

  • Density (kg/m3): 7860
  • Young’s Modulus (GPa): 190-210
  • Tensile Strength (MPa): 400 – 510 MPa
  • Yield Strength (MPa): 205-245 MPa
  • Poisson’s ratio: 0.26
  • Brinell Hardness (HB) 160

Equivalents
DIN Equivalents for JIS SS400: 17100 St 44-2
ASTM Equivalents for JIS SS400: ASTM A36, ASTM A283 Grade D
EN Equivalents for JIS SS400: EN S275/ BS 43A

Chemical Composition (%)
Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.

Tabel Ukuran & Berat Nominal Plat ASTM A-36:
Product Thickness (mm) Standard Sheet Size Weight per square metre
Mild Steel Plate 3mm 3.00 1200 x 2400mm (1.2 x 2.4m) 23.55
Mild Steel Plate 4mm 4.00 1200 x 2400mm (1.2 x 2.4m) 31.4
Mild Steel Plate 5mm 5.00 1200 x 2400mm (1.2 x 2.4m) 39.25
Mild Steel Plate 6mm 6.00 1200 x 2400mm (1.2 x 2.4m) 47.1
Mild Steel Plate 8mm 8.00 1200 x 2400mm (1.2 x 2.4m) 62.8
Mild Steel Plate 10mm 10.00 1200 x 2400mm (1.2 x 2.4m) 78.5
Mild Steel Plate 12mm 12.00 1200 x 2400mm (1.2 x 2.4m) 94.2
Mild Steel Plate 16mm 16.00 1200 x 2400mm (1.2 x 2.4m) 125.6
Mild Steel Plate 20mm 20.00 1200 x 2400mm (1.2 x 2.4m) 157
Mild Steel Plate 25mm 25.00 1200 x 2400mm (1.2 x 2.4m) 196.25
Melting Point
Melting point of SS400 is 1430 Degree Celsius
Applications:
base plates, gussets, liners, road plates, trench covers, etc.

Related Carbon Steel:

Besi H-Beam 350

Besi H-Beam 350

Beyond-Steel, Indonesia steel & iron wholesaler menjual H-Beam 350 JIS G 3192-2005 dengan berbagai ukuran. Standard size: 350 x 350 x 12 x 19mm. Melayani pengiriman seluruh Indonesia

Product: H-Beam 350
Kategori: Structural Steel
Standard: SNI
Manufactured: KS, GG

::Info pemesanan hubungi:::
» Tel : +62-021-3293 5972
» Fax: +62-021-8837 6742
» Mobile: +62-085 880 446 226
» E-mail:sales@beyond-steel.com
» Attn: Mugiyono M

—————————————————————————————————————————————-

H-Beam 400 

H-Beam 250

H-Beam 400

Beyond-Steel, Indonesia steel & iron wholesaler menjual H-Beam 400 JIS G 3192-2005 dengan berbagai ukuran. Standard size: 400 x 400 x 13 x 21. Melayani pengiriman seluruh Indonesia

Product: H-Beam 400
Kategori: Structural Steel
Standard: SNI According to JIS G 3192-2005
Manufactured: KS, GG

::Info pemesanan hubungi:::
» Tel : +62-021-3293 5972
» Fax: +62-021-8837 6742
» Mobile: +62-085 880 446 226
» E-mail:sales@beyond-steel.com
» Attn: Mugiyono M

—————————————————————————————————————————————-

H-Beam 350 

H-Beam 250

H-Beam 300 Standar SNI

Beyond-Steel, Indonesia steel & iron wholesaler menjual H-Beam 300 JIS G 3192-2005 dengan berbagai ukuran. Standard size: 300 x 300 x 10 x 15mm. Melayani pengiriman seluruh Indonesia

Product: H-Beam 300
Kategori: Structural Steel
Standard: SNI
Manufactured: KS, GG

::Info pemesanan hubungi:::
» Tel : +62-021-3293 5972
» Fax: +62-021-8837 6742
» Mobile: +62-085 880 446 226
» E-mail:sales@beyond-steel.com
» Attn: Mugiyono M

—————————————————————————————————————————————-

H-Beam 400 

H-Beam 250

H-Beam 250 JIS G 3192

Beyond-Steel, Indonesia steel & iron wholesaler menjual H-Beam 250 JIS G 3192-2005 dengan berbagai ukuran. Standard size: 250 x 250 x 9 x 14mm. Melayani pengiriman seluruh Indonesia

Product: H-Beam 250
Kategori: Structural Steel
Standard: SNI
Manufactured: KS, GG

::Info pemesanan hubungi:::
» Tel : +62-021-3293 5972
» Fax: +62-021-8837 6742
» Mobile: +62-085 880 446 226
» E-mail:sales@beyond-steel.com
» Attn: Mugiyono M

—————————————————————————————————————————————-

H-Beam 400 

H-Beam 300

H-Beam 200

Beyond-Steel, Indonesia steel & iron wholesaler menjual H-Beam 200 JIS G 3192-2005 dengan berbagai ukuran. Standard size: 200 x 200 x 8 x 12mm. Melayani pengiriman seluruh Indonesia

Product: H-Beam 200
Kategori: Structural Steel
Standard: SNI
Manufactured: KS, GG

::Info pemesanan hubungi:::
» Tel : +62-021-3293 5972
» Fax: +62-021-8837 6742
» Mobile: +62-085 880 446 226
» E-mail:sales@beyond-steel.com
» Attn: Mugiyono M

—————————————————————————————————————————————-

H-Beam 400 

H-Beam 300