Harga Plat Bisalloy 400

Harga Plat Bisalloy 400

Characteristic

Bisalloy400 is a through hardened, abrasion resistant steel plate , offering long life expectancy in high impact abrasion applications.

Chemical Composition (%)

Thickness C P Mn Si S Cr Mo B CE
(IIW)*
CET*
5 – < 16 Maximum 0.18 0.025 1.5 0.25 0.008 0.25 0.25 0.002 0.40 0.29
>= 16 – 80 Maximum 0.20 0.025 1.5 0.25 0.008 0.30 0.25 0.002 0.50 0.35
> 80 – 100 Maximum 0.18 0.025 1.5 0.25 0.008 1.20 0.25 0.002 0.58 0.34

Fabrication

Bisalloy400 is high hardness, abra sion resistant steel offering very good impact toughness properties.

Bisalloy400 provides an optimum combination of abrasion resistant, toughness and weldability. Due to its low alloy content, Bisalloy400 can be readily welded using conventional welding processes and low hydrogen consumables.

Cold forming of Bisalloy400 is achievable on all thicknesses although an allowance for the higher strength should be taken into account. Bending machine capabilities should also be taken into consideration prior to any forming operation. Heating above 250ºC should be avoided, otherwise mechanical properties may be affected.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 1070 MPa
Tensile Strength 1320 MPa
Elongation in 50mm G.L 14%
Charpy Impact (longitudinal) +20ºC (10mm x 10mm) 55 J
Hardness 370 – 430 HB 400 HB

Application

Bisalloy400 offers excellent wear and abrasion resistant and impact toughness in applications which include:

• Dump Truck Wear Liners
• Screw Conveyors
• Chutes
• Storage Bins
• Earth Moving Buckets
• Cyclones
• Deflector Plates
• Ground Engaging Tools
• Cutting Edges

Product Wear Plates:

Jual Plat Bisalloy450

Bisalloy450 is a through hardened abrasion resistant steel plate with guaranteed high impact toughness.

Chemical Composition

Thickness C P Mn Si S Ni Cr Mo B CE PCM
(IIW)
6 – 20 Maximum 0.23 0.025 1.00 0.60 0.008 0.25 1.00 0.25 0.002 0.46 0.30
25 – 50 Maximum 0.23 0.025 1.20 0.60 0.008 0.25 1.20 0.35 0.002 0.58 0.3

Fabrication

A unique chemical composition and steelmaking process for Bisalloy450 has been developed, incorporating
low carbon/low manganese contents. This is designed to improve transverse mechanical properties and produce low levels of segregation and ensures the newly developed Bisalloy450 not only has superior mechanical properties but also good formability and weldability.

Bisalloy450 can be readily welded using conventional low hydrogen MWAW and GMAW welding consum ables and processes. It can be welded to other weldable steels.

BISALLOY 450 can be cold bent by brake press-bending or roll bend method. However, Bisalloy 450 has higher hardness and strength levels compared to plain carbon steels and therefore suitable consideration of sufficient machine, plate bending direction and former radii must be made. Bisalloy450 should be bent at room temperature or below 200ºC to avoid reduction of mechanical properties.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 1150 MPa
Tensile Strength 1400 MPa
Elongation in 50mm G.L 12%
Charpy Impact (longitudinal) +40ºC
8mm (T) x 10mm x 5mm
10mm (T) x 10mm x 7.5mm
12 – 20mm (T) x 10mm x 10mm
>20 – 40mm (T) x 10mm x 10mm
>40 – 50mm (T) x 10mm x 10mm
17 J (min)
21 J (min)
25 J (min)
20 J (min)
15 J (min)
Hardness 425 – 475 HB 450HB

Application

Long life expectancy in high impact abrasion applications makes Bisalloy 450 the ideal choice for a variety of applications, including:

• Dump Truck Bodies & Dump Truck Wear Liners
• Mining Buckets
• Tipper Bodies
• Cutting Edges
• Construction Waste Bins
• Liner Plates / Chutes

Product Wear Plates:

Ympress Plate

Description
Ympress is the brand name for the series of hot-rolled High-Strength Low-Alloy steel produced by TMCP (Thermal Mechanical Control Process). Through customer focus the Ympress range has been continuously improved and widened to match the increasing requirements of our customers. Ympress delivers high strength steel with consistent properties, excellent surface quality and high formability. To ensure an optimum match with standards, all grades have been designed to meet or exceed specifications conform EN 10149.

Ympress offer a wide range of strength levels between S315MC up to S700MC and a broad dimensional range with gauges between 1.5 and 20 mm and widths up to 2070 mm. Because of the wide dimensional range and the number of strength levels included in the Ympress brand, Ympress can be used for many applications ranging from construction profiles to crane booms.

Chemical Composition

C Mn Si P S Altot Nb V Ti Mo
Guaranteed ≤ 0.08 ≤ 1.90 ≤ 0.15 0.003 ≤ 0.05 ≤ 0.015 ≤ 0.09 ≤ 0.01 ≤ 0.15 ≤ 0.02
Typical CEV 0.35
Typical Pcm 0.16 (Japanese welding society standard)

Mechanical Properties

Thickness ReH in MPa Rm in MPa A80 in % Adp5 in %
Typical 2 – 3 mm 825 840 13
4 – 8 mm 800 845 19
8 – 10 mm 750 825 18
Guaranteed ≥ 690 750 – 950 ≥ 12 ≥ 14
Bend 0.5t for thickness ≤ 3mm
1t for thickness ≤ 6mm
1.5t for thickness > 6mm

Ympress Benefits

The consistency in chemical composition and production conditions provide the basis for the consistency in product properties of Ympress. Through its properties Ympress contributes to an optimum and efficient processing and high quality finished products.

  • Formability:
    The precise control of the sulphur content prevents the formation of MnS particles resulting in improved bending characteristics for Ympress. Even the use of a very small bending radius (0t) is possible for many strength levels. The guaranteed elongation levels are leading in the European industry.
  • Consistency:
    Ympress’ consistent properties and narrow gauge control ensure the same bending behaviour from sheet to sheet and from coil to coil. This reduces the intermediate setup times for tooling and increases efficiency.
  • Welding:
    The guaranteed low carbon equivalent allows Ympress to be welded trouble free with the commonly used welding methods. Pre- or post heating of the steel is therefore not necessary.
  • Galvanising:
    Most Ympress can directly be galvanised, the very low silicon content prevents the formation of surface defects by the Sandelin effect. For the highest strength levels E690TM and S700MC it is recommended to test the galvanising conditions first.
  • Laser cutting:
    For the optimisation of your laser cutting process we recommend the use of Ympress Laser. Ympress Laser is a superior product because of the low tensions in the material, the low silicon content and the extra high surface quality.
  • High surface quality:
    The low silicon content of all Ympress grades avoids the formation of so called ‘tiger stripes’ . The high quality surface can lead to fewer processing steps during manufacture.

Fabrication

The low carbon equivalent of Ympress makes it readily weldable and permits the use of high welding speeds. There is no need for pre-or post-welding treatment.

Adjacent to the weld a narrow Heat Affected Zone (HAZ) with a slightly decreased hardness is produced, however, with standard welding techniques this has no practical significance.

Tensile tests taken transverse to the weld show the same tensile strength as the parent material.

Stress relieving should be done in temperature ranges of 980° – 1080° F. Heating above this range reduces strength and should be avoided.

Application

Ympress combines high strength with excellent formability and weldability. It is used in applications such :

• Earth Moving Vehicles
• Large Cranes / Mobile Cranes
• Telescopic Booms

In these applications the high strength of steel is used to save weight and increase the load bearing capacity.

Product Wear Plates:

Harga Baja VCN

Steel VCN 150

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Harga Plat Mild Steel ASTM A-36

Characteristic

Mild Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications. Mild Steel Plate ASTM A-36 is one of the most commonly used hot rolled general structural steel. Typical carbon steel materials, they are very cheap, excelling in weldability & machinability and they can be subjected to various heat treatments.

Availability
Supplied as plates, sheets, flats, bars, sections, etc.
Plate Thickness: 4.5 mm, 6 mm, 8 mm, 10 mm dan 12 mm
Size: 5′ x 20′ , 6′ x 20′ , 4′ x 8′
Size: Thickness x Width x Length

Specifications
Grade: ASTM A36, AISI A-36
Workability: Easy to Weld, Cut, Form and Machine

Mechanical Properties

  • Density (kg/m3): 7860
  • Young’s Modulus (GPa): 190-210
  • Tensile Strength (MPa): 400 – 510 MPa
  • Yield Strength (MPa): 205-245 MPa
  • Poisson’s ratio: 0.26
  • Brinell Hardness (HB) 160

Equivalents
DIN Equivalents for JIS SS400: 17100 St 44-2
ASTM Equivalents for JIS SS400: ASTM A36, ASTM A283 Grade D
EN Equivalents for JIS SS400: EN S275/ BS 43A

Chemical Composition (%)
Carbon (C), Silicon (Si) and Manganese (Mn) content are not controlled. Phosphorus (P) 0.05% Max and Sulphur (S) 0.05% Max have to controlled below these levels.

Tabel Ukuran & Berat Nominal Plat ASTM A-36:
Product Thickness (mm) Standard Sheet Size Weight per square metre
Mild Steel Plate 3mm 3.00 1200 x 2400mm (1.2 x 2.4m) 23.55
Mild Steel Plate 4mm 4.00 1200 x 2400mm (1.2 x 2.4m) 31.4
Mild Steel Plate 5mm 5.00 1200 x 2400mm (1.2 x 2.4m) 39.25
Mild Steel Plate 6mm 6.00 1200 x 2400mm (1.2 x 2.4m) 47.1
Mild Steel Plate 8mm 8.00 1200 x 2400mm (1.2 x 2.4m) 62.8
Mild Steel Plate 10mm 10.00 1200 x 2400mm (1.2 x 2.4m) 78.5
Mild Steel Plate 12mm 12.00 1200 x 2400mm (1.2 x 2.4m) 94.2
Mild Steel Plate 16mm 16.00 1200 x 2400mm (1.2 x 2.4m) 125.6
Mild Steel Plate 20mm 20.00 1200 x 2400mm (1.2 x 2.4m) 157
Mild Steel Plate 25mm 25.00 1200 x 2400mm (1.2 x 2.4m) 196.25
Melting Point
Melting point of SS400 is 1430 Degree Celsius
Applications:
base plates, gussets, liners, road plates, trench covers, etc.

Related Carbon Steel:

Harga AISI 1045 Steel

AISI 1045 Steel Roundbar

Characteristic
AISI 1045 Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
AISI 1045 Steel Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Availability
Round bar, Flat

Size

Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

Hardness
Brinell Hardness (HB) 160-220 (Annealed)

Equivalents
DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius

Applications

Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to: sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel:

Harga Plat Durinox F12N-304

Dear valued customers,

Beyond-Steel menjual plat Durinox stainless steel Grade import dengan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:
Tel  : +62-021-2986 1684
Fax : +62-021-2986 1684
Mobile: +62-0818 0817 1467
E-mail: sales@beyond-steel.com

Characteristic

DURINOX ™ is developed mainly for the agricultural industries where corrosion and abrasion are often the major source of cost and quality problems.

Durinox™ is a registered trademark of Beyond-steel covering a range of ferritic stainless steel grades.

Durinox™ offers superior and low-cost solution to carbon steels and, in many cases, to austenitic stainless steels.

Durinox™ is developed mainly for the agricultural industries where corrosion and abrasion are often the major source of cost and quality problems. It is also often the case that many of the plants in agricultural industries were originally designed with carbon steels because of its low cost. In many cases, this proved a false
economy, since carbon steel performs poorly against corrosion and abrasion.

Durinox™ stainless steels is an excellent choice for agricultural industries as it is both chemically inert in contact with food and produce and also biologically inert which reduce the risk of micro-organism colony growth.

Durinox™ offers the following benefits compared to austenitic stainless steels and carbon steel:

  • Similar thermal expansion to carbon steel and lower compared to austenitic stainless steels, and there-
    fore it distort less when heated
  • Thermal conductivity that is much higher than austenitic stainless steels
  • High temperature oxidation resistance, they are less prone to scaling
  • Its mechanical properties are very similar to carbon steel making it easy to cut and work without the need of specialized tools. They are also less prone to spring back compared austenitic stainless steels
  • It is not prone to stress corrosion cracking
  • They can be used in temperatures to up to 600°C which is far better than carbon steel and is more than
    sufficient for most agricultural industries

Availability

Plat Durinox™ F12N is available as hot rolled sheet and plates with no. 1 (as rolled) finish.

Product Thickness Size (WxL)
Plat Durinox 1.6 mm x 1500 x 6000 mm
Plat Durinox 2 mm x 1500 x 6000 mm
Plat Durinox 3 mm x 1500 x 6000 mm
Plat Durinox 4 mm x 1500 x 6000 mm
Plat Durinox 5 mm x 1500 x 6000 mm
Plat Durinox 6 mm x 1500 x 6000 mm
Plat Durinox 8 mm x 1500 x 6000 mm
Plat Durinox 10 mm x 1500 x 6000 mm
Plat Durinox 12 mm x 1500 x 6000 mm
Plat Durinox 16 mm x 1500 x 6000 mm
Plat Durinox 20 mm x 1500 x 6000 mm
Plat Durinox 25 mm x 1500 x 6000 mm

Mechanical Properties

Grade Tensile
Strength
(MPa) min
Yield
Strength
(MPa) min
Elongation
(%)
min
Hardness
Brinell
(HB) min
Cold Bend
Transverse direction
Bend radius = 1T
F12N 455 275 18 220
SUS 304 515 250 40 200 180°
Mild Steel 375 250 20 180 180°

Chemical Composition

C Mn Si P S Cr Ni
0.03 0.15 1.00 0.025 0.005 10.5 – 12.5 0.3 – 1.0

Physical Properties

Grade Density
(g/cm3)
Average thermal
expansion
Coefficient from
0°C to
Thermal
Conductivity
100oC
(W.m.K)
Electrical
resistivitynΩ.m
Specific
Heat(j/kg.oK)
Young
Modulus
(GPa)
100°C
µ/m.°C
538°C
µ/m.°C
F12N 7.7 10.8 11.9 23 580 460 220
SUS 304 8.0 17.2 18.4 16.2 720 500 193
SUS 316 8.0 15.9 17.5 16.2 740 500 193
Mild Steel 7.8 12.2 14.3 57.8 142

Related Stainless Steel: