Jual Plat Quard 400

Jual Plat Quard 400

Description
Quard 400 is an abrasion resistant steel with an initial hardness of 400 Brinell.

Due to its optimal combination of hardness, strength and ductility, Quard 400 can be used in any application subject to wear from various hard abrasives such as rocks, sand, minerals, scrap, waste or other aggressive materials.

Quard 400 is easy to bend, cut, machine and weld (to some extent, it’s like processing mild steel).

In all thicknesses Quard 400 provides an excellent surface finish within tight thickness tolerances, with a high-quality appearance and maximum fitting accuracy.

Quard 400 is ideal for applications such as: buckets, crushers, cutting edges, dump trucks, loaders, skips, sieves, feeders, measuring pockets, skips, etc

Availability
Quard 400 at present is supplied in the following range:
• thickness: 4 – 30 mm
• width: 1500 – 3100 mm

Chemical composition: ( % )

C Si Mn Cr Mo P Ni S B
 0.19 0.60 1.60 0.50 0.25 0.025 0.025 0.010 0.005

Mechanical Properties
Hardness (HBW) : 370 – 430
Charpy-V notch : 40J
impact test (longitudinal at -40 °C)
Yield Strength (MPa): 1050
Tensile Strength (MPa): 1250
Elongation (%): 10

Application
• mining and earthmoving machinery
• crushing and pulverizing equipment
• buckets, knives, crushers, feeders
• presses
• skips
• excavators
• slurry pipe systems
• screw conveyors

Product Wear Plates:

Jual Plat Bisalloy450

Bisalloy450 is a through hardened abrasion resistant steel plate with guaranteed high impact toughness.

Chemical Composition

Thickness C P Mn Si S Ni Cr Mo B CE PCM
(IIW)
6 – 20 Maximum 0.23 0.025 1.00 0.60 0.008 0.25 1.00 0.25 0.002 0.46 0.30
25 – 50 Maximum 0.23 0.025 1.20 0.60 0.008 0.25 1.20 0.35 0.002 0.58 0.3

Fabrication

A unique chemical composition and steelmaking process for Bisalloy450 has been developed, incorporating
low carbon/low manganese contents. This is designed to improve transverse mechanical properties and produce low levels of segregation and ensures the newly developed Bisalloy450 not only has superior mechanical properties but also good formability and weldability.

Bisalloy450 can be readily welded using conventional low hydrogen MWAW and GMAW welding consum ables and processes. It can be welded to other weldable steels.

BISALLOY 450 can be cold bent by brake press-bending or roll bend method. However, Bisalloy 450 has higher hardness and strength levels compared to plain carbon steels and therefore suitable consideration of sufficient machine, plate bending direction and former radii must be made. Bisalloy450 should be bent at room temperature or below 200ºC to avoid reduction of mechanical properties.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 1150 MPa
Tensile Strength 1400 MPa
Elongation in 50mm G.L 12%
Charpy Impact (longitudinal) +40ºC
8mm (T) x 10mm x 5mm
10mm (T) x 10mm x 7.5mm
12 – 20mm (T) x 10mm x 10mm
>20 – 40mm (T) x 10mm x 10mm
>40 – 50mm (T) x 10mm x 10mm
17 J (min)
21 J (min)
25 J (min)
20 J (min)
15 J (min)
Hardness 425 – 475 HB 450HB

Application

Long life expectancy in high impact abrasion applications makes Bisalloy 450 the ideal choice for a variety of applications, including:

• Dump Truck Bodies & Dump Truck Wear Liners
• Mining Buckets
• Tipper Bodies
• Cutting Edges
• Construction Waste Bins
• Liner Plates / Chutes

Product Wear Plates:

Jual AISI 4140 Steel Round Bar

Product : Steel AISI 4140
Kategori: Machinery Steel
Grades : Quenched & Tempered Alloyed Engineering Steel

Characteristics
AISI 4140 is a Chromium-Molybdenum through-hardening steel of medium hardenability. It is a general purpose high-tensile steel with medium strength level and good impact properties
Very common Quenched & Tempered alloyed engineering steel grade With high intensity, high hardenability. It has a small distortion afer quenching, a high creep strength and lasting intensity afer processing of high tempreature.

Equivalent
Thyssen 7225, DIN 42CrMo4, ASSAB 709, VCL140, JIS SCM 440

Availability
Round bar
Sizes: 10mm – 400mm

Chemical composition: ( % )

C Si Mn Cr Mo S\P Ni\Cu
0.38-0.45 0.15-0.40 0.60-0.90 0.90-1.20 0.15-0.30 0.035 0.03

Features
AISI 4140 is supplied in the hardened and tempered condition. The level of hardness is selected to give useful strength while still maintaining the ability to machine the material into finished components.
AISI 4140 can be re-heat-treated to higher strength or tempered back to lower strength levels than those supplied as standard. Assistance with heat treatment should be sought from reputable heat treatment companies.

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied :
Supplied Condition: Quenched & Tempered

Application
It’s mainly used for making various kinds of machinery, automobile, mining spare part, the gearwheel of the engine, the driving gear of supercharger, the abckshaft, the conncetingrob and the pinchock under the high pressure. Parts for power train applications, cold formed fastener components, shafts, gears, drill collars for the oil exploration, etc.

Product Machinery Steel:


Penelusuran terkait: Jual AISI4140,or equivalent Thyssen 7225, equivalent DIN 42CrMo4, Harga steel AISI 4140, or equivalent ASSAB 709, equivalent VCL140, standard JIS SCM 440, catalog AISI, Spesifikasi 4140, Properties of AISI 4140, Ukuran plat AISI 4140, agen plat AISI 4140, up to 3000mm width steel 4140, length 6m,

Jual AISI 4340 Steel Round Bar

Product : Steel AISI 4340
Kategori: Machinery Steel
Grades : High Tensile Nickel Chrome Steel

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent
Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, VCN 150, JIS SMCM 431,Atlas Ultimo 200,

Availability
Round bar

Chemical Composition:(%)

C Si Mn Cr Mo S\P Ni
0.38-0.43 0.20-0.35 0.60-0.80 0.70-0.90 0.20-0.30 0.040 Max 1.65-2.00

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Beyond Steel
CV. Far Beyond Energy
[Address] Jl. Permata 8 No.14 Tambun – Bekasi 17568
[Website] www.beyond-steel.com [Phone] +62-21 3293 5972
[Email] sales@beyond-steel.com [Fax] +62-21 8837 6742

Product Machinery Steel:

» Jual Steel S45C
» Jual AISI 1045 Steel
» Jual AISI 4140 Steel Round Bar
» Jual Steel VCL 140
» Jual DIN 42CrMo4 Steel
» Jual DIN 34NiCrMo6 Steel
» Beyond Steel Equivalent
» Associated Swedish Steels AB Grades
» Jual BÖhler Steel

Harga Plat Durinox F12N-304

Dear valued customers,

Beyond-Steel menjual plat Durinox stainless steel Grade import dengan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:
Tel  : +62-021-2986 1684
Fax : +62-021-2986 1684
Mobile: +62-0818 0817 1467
E-mail: sales@beyond-steel.com

Characteristic

DURINOX ™ is developed mainly for the agricultural industries where corrosion and abrasion are often the major source of cost and quality problems.

Durinox™ is a registered trademark of Beyond-steel covering a range of ferritic stainless steel grades.

Durinox™ offers superior and low-cost solution to carbon steels and, in many cases, to austenitic stainless steels.

Durinox™ is developed mainly for the agricultural industries where corrosion and abrasion are often the major source of cost and quality problems. It is also often the case that many of the plants in agricultural industries were originally designed with carbon steels because of its low cost. In many cases, this proved a false
economy, since carbon steel performs poorly against corrosion and abrasion.

Durinox™ stainless steels is an excellent choice for agricultural industries as it is both chemically inert in contact with food and produce and also biologically inert which reduce the risk of micro-organism colony growth.

Durinox™ offers the following benefits compared to austenitic stainless steels and carbon steel:

  • Similar thermal expansion to carbon steel and lower compared to austenitic stainless steels, and there-
    fore it distort less when heated
  • Thermal conductivity that is much higher than austenitic stainless steels
  • High temperature oxidation resistance, they are less prone to scaling
  • Its mechanical properties are very similar to carbon steel making it easy to cut and work without the need of specialized tools. They are also less prone to spring back compared austenitic stainless steels
  • It is not prone to stress corrosion cracking
  • They can be used in temperatures to up to 600°C which is far better than carbon steel and is more than
    sufficient for most agricultural industries

Availability

Plat Durinox™ F12N is available as hot rolled sheet and plates with no. 1 (as rolled) finish.

Product Thickness Size (WxL)
Plat Durinox 1.6 mm x 1500 x 6000 mm
Plat Durinox 2 mm x 1500 x 6000 mm
Plat Durinox 3 mm x 1500 x 6000 mm
Plat Durinox 4 mm x 1500 x 6000 mm
Plat Durinox 5 mm x 1500 x 6000 mm
Plat Durinox 6 mm x 1500 x 6000 mm
Plat Durinox 8 mm x 1500 x 6000 mm
Plat Durinox 10 mm x 1500 x 6000 mm
Plat Durinox 12 mm x 1500 x 6000 mm
Plat Durinox 16 mm x 1500 x 6000 mm
Plat Durinox 20 mm x 1500 x 6000 mm
Plat Durinox 25 mm x 1500 x 6000 mm

Mechanical Properties

Grade Tensile
Strength
(MPa) min
Yield
Strength
(MPa) min
Elongation
(%)
min
Hardness
Brinell
(HB) min
Cold Bend
Transverse direction
Bend radius = 1T
F12N 455 275 18 220
SUS 304 515 250 40 200 180°
Mild Steel 375 250 20 180 180°

Chemical Composition

C Mn Si P S Cr Ni
0.03 0.15 1.00 0.025 0.005 10.5 – 12.5 0.3 – 1.0

Physical Properties

Grade Density
(g/cm3)
Average thermal
expansion
Coefficient from
0°C to
Thermal
Conductivity
100oC
(W.m.K)
Electrical
resistivitynΩ.m
Specific
Heat(j/kg.oK)
Young
Modulus
(GPa)
100°C
µ/m.°C
538°C
µ/m.°C
F12N 7.7 10.8 11.9 23 580 460 220
SUS 304 8.0 17.2 18.4 16.2 720 500 193
SUS 316 8.0 15.9 17.5 16.2 740 500 193
Mild Steel 7.8 12.2 14.3 57.8 142

Related Stainless Steel:

Harga Plat Bisalloy 80

Dear valued customers,
Beyond-Steel menjual plat bisalloy Grade 80 (Bis-80) import dengan ukuran dan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:
Tel  : +62-021-3293 5972
Fax : +62-021-8837 6742
Mobile: +62-0858 8044 6226
E-mail: sales@beyond-steel.com

Characteristic

Bis-80 is a high strength, low alloy steel plate with a yield stress three times of carbon steel and featuring low carbon, excellent notch toughness, good weldability and formability.

Fabrication

Bis 80 is a low alloy high stregthsteel manufactured with a controlled carbon equivalent for optimum weldability.

Bis 80 can be successfully welded to itself and a range of other steels, provided low hydrogen consumables are used and attention is paid to pre-heat, interpass temperature, heat input and the degree of joint restraint.

Stress relieving can be achieved at 540ºC – 570ºC. Heating above this temperature should be avoided to minimize any adverse effects on mechanical properties. Cold forming can be successfully conducted, provided due account is taken of the increased strength of the steel.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 690 MPa (Min)* 750 MPa
Tensile Strength 790-930 MPa* 830 MPa
Elongation in 50mm G.L 18%* 26%
Charpy Impact (longitudinal) +20ºC (10mm x 10mm) 40 J (Min)* 160 J
Hardness 255 HB

*Dependant on Plate Thickness

Chemical Composition

Thickness C P Mn Si S Cr Mo B CE
(IIW)*
CET*
5 – < 16 Maximum 0.18 0.025 1.5 0.25 0.008 0.25 0.25 0.002 0.40 0.29
>= 16 – 80 Maximum 0.20 0.025 1.5 0.25 0.008 0.30 0.25 0.002 0.50 0.35
> 80 – 100 Maximum 0.18 0.025 1.5 0.25 0.008 1.20 0.25 0.002 0.58 0.34

Application

• Transport Equipment ( Low Loaders )
• Mining Equipment (Longwall Roof Supports/ Dump Truck Tray )
• High Rise Building ( Columns )
• Induced Draft Fans
• Excavator Buckets
• Lifting Equipment ( Mobile Cranes / Container Handling Equipment )
• Bridges
• Storage Tanks

Product Wear Plates:

Harga Plat Sumihard K-400

Dear valued customers,
Tersedia dijual plat Sumihard Grade K-400, K-450, K-500 import, dengan ukuran dan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:

Tel  : +62-021-3293 5972
Fax : +62-021-8837 6742
Mobile: +62-0858 8044 6226
E-mail: sales@beyond-steel.com

Sumihard K-400 Wear Resistant Alloy Steel Plate
Sumihard K-400 is a through hardened abrasion resistant steel with a typical hardness of 415 BHN. These steels are the most widely used of the wear resistant grades. They exhibit an excellent combination of high resistance to impact, workability, weldability and resistance to abrasion. It has about 3 times the abrasion resistance of common steel plate and contribute to prolonging the service life of mechanical parts.

Chemical Composition

Chemical   C Si Mn    P S B
Composition % < 0.21 < 0.70 < 1.60 < 0.025 < 0.01 < 0.003

Mechanical Properties
Brinell Hardness: 360-440
Heat Treatment: Quenched & Tempered
Yield Point min MPa: 1156 MPa
Tensile Strength MPa: 1325 MPa
Elongation: 25%

Tabel Ukuran dan Berat Nominal Plat Sumihard K-400

Product Ukuran Berat
Plat Sumihard 5 mm x 2500 x 8000 mm =         785 Kg
Plat Sumihard 6 mm x 2500 x 8000 mm =         942 Kg
Plat Sumihard 8 mm x 2500 x 8000 mm =      1,256 Kg
Plat Sumihard 10 mm x 2500 x 8000 mm =      1,570 Kg
Plat Sumihard 12 mm x 2500 x 8000 mm =      1,884 Kg
Plat Sumihard 16 mm x 2500 x 8000 mm =      2,512 Kg
Plat Sumihard 20 mm x 2500 x 8000 mm =      3,140 Kg
Plat Sumihard 25 mm x 2500 x 8000 mm =      3,925 Kg
Plat Sumihard 30 mm x 2500 x 8000 mm =      4,710 Kg
Plat Sumihard 32 mm x 2500 x 8000 mm =      5,024 Kg
Plat Sumihard 35 mm x 2500 x 8000 mm =      5,495 Kg
Plat Sumihard 40 mm x 2500 x 8000 mm =      6,280 Kg
Plat Sumihard 50 mm x 2500 x 8000 mm =      7,850 Kg
Plat Sumihard 90 mm x 2500 x 8000 mm =   14,130 Kg
Plat Sumihard 120 mm x 2500 x 8000 mm =   18,840 Kg

Formula Hitung Berat/lembar = [ (TebalxLebarxPanjang x 7,85)/ 1.000.000 ]

Cutting
Cutting is possible with oxy-propane, oxy-acetylene, plasma, laser and water. Stack cutting should be avoided. After gas cutting, the steel plate should not be sprayed or cooled with water. Tungsten Carbide tools are recommended with close attention to cutting speeds and feeds.

Machining
Machining speeds are 50-70% of plain carbon steel. Constant feed and lubrication should be maintained.

Forming
Cold forming can be carried out using the following guidelines

Welding
Welding can be carried out by manual metal arc, submerged arc or gas metal arc welding. Because the properties of Sumihard 400 results from quenching and tempering, to obtain optimum results the following recommendations should be served when welding.

  • Electrodes and fluxes should be of the low hydrogen type, baked and stored strictly in accordance with the manufacturers recommendations.
  • It is recommended that Sumihard 400 be preheated to a suitable temperature to eliminate the risk of cold cracking in the weld area.
  • The selection of preheat temperatures are dependant upon the plate thickness, geometry and other associated factors. The minimum preheat temperatures for optimum results are set out in the following chart:

Applications:
Dump Truck Liners, Ripper Tynes, Bucket Wear Liners, Cutting Edges, Mining Liner Plates, Agricultural Machinery

Related Wear Plates: