Jual Plat Quard 450

Jual Plat Quard 450

Quard 450 offers high wear resistance in applications exposed to increased wear from sliding abrasion and heavy impacts from crushing rocks, gravel, sand or other harsh abrasives.

With a typical hardness of 450 Brinell, Quard 450 combines high strength with very good workability, especially in welding and cold forming.

Quard 450 combines the attributes of hardness and toughness with improved crack resistance and high durability.

Quard 450 in thinner gauges, opens up new design solutions for applications aimed at reducing weight, increasing payload and durability as well as reducing energy consumption and the impact on the environment.

Thickness: 8 – 20 mm
Width: 1500 – 2500 mm
Length: maximum 13 m

Chemical composition: ( % )

C Si Mn Cr Mo P Ni S B
 0.21 0.70 1.60 0.50 0.25 0.025 0.025 0.010 0.005

Mechanical Properties
Hardness (HBW) : 420 – 480
Charpy-V notch : 35 J
impact test (longitudinal at -40 °C)
Yield Strength (MPa): 1100
Tensile Strength (MPa): 1400
Elongation (%): 10

Quard 450 is mainly recommended for the following applications:
• on road tipper and dumper bodies
• cement drum mixer barrels,
• refuse haulers, scrap containers
• buckets, knives
• feeders, skips, screw conveyors
• mining and earthmoving machinery

Product Wear Plates:

Back to Top
Jual Plat Quard 400

Jual Plat Quard 400

Quard 400 is an abrasion resistant steel with an initial hardness of 400 Brinell.

Due to its optimal combination of hardness, strength and ductility, Quard 400 can be used in any application subject to wear from various hard abrasives such as rocks, sand, minerals, scrap, waste or other aggressive materials.

Quard 400 is easy to bend, cut, machine and weld (to some extent, it’s like processing mild steel).

In all thicknesses Quard 400 provides an excellent surface finish within tight thickness tolerances, with a high-quality appearance and maximum fitting accuracy.

Quard 400 is ideal for applications such as: buckets, crushers, cutting edges, dump trucks, loaders, skips, sieves, feeders, measuring pockets, skips, etc

Quard 400 at present is supplied in the following range:
• thickness: 4 – 30 mm
• width: 1500 – 3100 mm

Chemical composition: ( % )

C Si Mn Cr Mo P Ni S B
 0.19 0.60 1.60 0.50 0.25 0.025 0.025 0.010 0.005

Mechanical Properties
Hardness (HBW) : 370 – 430
Charpy-V notch : 40J
impact test (longitudinal at -40 °C)
Yield Strength (MPa): 1050
Tensile Strength (MPa): 1250
Elongation (%): 10

• mining and earthmoving machinery
• crushing and pulverizing equipment
• buckets, knives, crushers, feeders
• presses
• skips
• excavators
• slurry pipe systems
• screw conveyors

Product Wear Plates:

Jual Plat Bisalloy450

Bisalloy450 is a through hardened abrasion resistant steel plate with guaranteed high impact toughness.

Chemical Composition

Thickness C P Mn Si S Ni Cr Mo B CE PCM
6 – 20 Maximum 0.23 0.025 1.00 0.60 0.008 0.25 1.00 0.25 0.002 0.46 0.30
25 – 50 Maximum 0.23 0.025 1.20 0.60 0.008 0.25 1.20 0.35 0.002 0.58 0.3


A unique chemical composition and steelmaking process for Bisalloy450 has been developed, incorporating
low carbon/low manganese contents. This is designed to improve transverse mechanical properties and produce low levels of segregation and ensures the newly developed Bisalloy450 not only has superior mechanical properties but also good formability and weldability.

Bisalloy450 can be readily welded using conventional low hydrogen MWAW and GMAW welding consum ables and processes. It can be welded to other weldable steels.

BISALLOY 450 can be cold bent by brake press-bending or roll bend method. However, Bisalloy 450 has higher hardness and strength levels compared to plain carbon steels and therefore suitable consideration of sufficient machine, plate bending direction and former radii must be made. Bisalloy450 should be bent at room temperature or below 200ºC to avoid reduction of mechanical properties.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 1150 MPa
Tensile Strength 1400 MPa
Elongation in 50mm G.L 12%
Charpy Impact (longitudinal) +40ºC
8mm (T) x 10mm x 5mm
10mm (T) x 10mm x 7.5mm
12 – 20mm (T) x 10mm x 10mm
>20 – 40mm (T) x 10mm x 10mm
>40 – 50mm (T) x 10mm x 10mm
17 J (min)
21 J (min)
25 J (min)
20 J (min)
15 J (min)
Hardness 425 – 475 HB 450HB


Long life expectancy in high impact abrasion applications makes Bisalloy 450 the ideal choice for a variety of applications, including:

• Dump Truck Bodies & Dump Truck Wear Liners
• Mining Buckets
• Tipper Bodies
• Cutting Edges
• Construction Waste Bins
• Liner Plates / Chutes

Product Wear Plates:

Jual Wiremesh

Jual Wiremesh

Wire mesh is a material that is made from various strands of interconnected metal, usually steel or aluminum. These strands can be welded together, extruded, or even connected by pins or other devices. The size and permeability of the wire mesh will often dictate its various uses; thinner mesh can be used as pasta or vegetable strainers, whereas larger, pinned mesh can be used as a conveyor belt in an industrial setting. Sometimes this type of mesh is used in gardening and landscaping applications as well.

One of the most commonly used types of mesh is welded wire mesh. This is often used in concrete construction, as the mesh can be laid down before the concrete is poured. The concrete can then be poured around the mesh, and once it sets, the concrete will have a higher tensile strength because the wire mesh contained within will help stabilize the often brittle concrete. This type of mesh is often used in place of steel rebar, which is a series of interconnected steel rods. Mesh tends to be easier to install and it comes at a lower cost than rebar for concrete projects.

Wire mesh is used in guarding for secure areas and as protection in the form of vandal screens.
Wire mesh can be fabricated to produce park benches, waste baskets and other baskets for material handling.

Tabel Ukuran dan Berat Nominal Wiremesh Standard

Product Type Ukuran Satuan Berat (Kg)
Wiremesh M4 210cmx54m Roll 155 Kg
Wiremesh M5Banci 210cmx54m Roll 242 Kg
Wiremesh M5Asli 210cmx54m Roll 242 Kg
Wiremesh M6Banci 210cmx54m Roll 347,6 Kg
Wiremesh M6Asli 210cmx54m Roll 347,6 Kg
Wiremesh M7Banci 210cmx540cm Lbr 47,31 Kg
Wiremesh M7Asli 210cmx540cm Lbr 47,31 Kg
Wiremesh M8Banci 210cmx540cm Lbr 61,79 Kg
Wiremesh M8Asli 210cmx540cm Lbr 61,79 Kg
Wiremesh M9Banci 210cmx540cm Lbr 78,21 Kg
Wiremesh M9Asli 210cmx540cm Lbr 78,21 Kg
Wiremesh M10Banci 210cmx540cm Lbr 96,55 Kg
Wiremesh M10Asli 210cmx540cm Lbr 96,55 Kg
Spesifikasi Bahan Wire Mesh
Wire Mesh Diameter (mm) Actual Weight (gr/mm) Kekuatan Tarik (N/mm2) Batas Ulur (N/mm2) Elongation (%)
M4 4 15,45 min 490 min 400 min 8%
M5 4,7 21,33 min 490 min 400 min 8%
M5 4,5 19,55 min 490 min 400 min 8%
M6 5,7 31,37 min 490 min 400 min 8%
M6 5,5 29,2 min 490 min 400 min 8%
M7 6,7 43,34 min 490 min 400 min 8%
M7 6,5 40,79 min 490 min 400 min 8%
M8 7,7 57,24 min 490 min 400 min 8%
M8 7,5 54,31 min 490 min 400 min 8%
M9 8,7 73,07 min 490 min 400 min 8%
M9 8,5 69,75 min 490 min 400 min 8%
M10 9,7 90,84 min 490 min 400 min 8%
M10 9,5 87,13 min 490 min 400 min 8%
M11 10,7 110,53 min 490 min 400 min 8%
M11 10,5 106,44 min 490 min 400 min 8%
M12 11,7 132,16 min 490 min 400 min 8%
M12 11,5 127,68 min 490 min 400 min 8%
Spesifikasi Wire Mesh
Type Diameter (mm) Ukuran (m) Spasi (cm) Berat Table (kg/roll) Berat Actual Toleransi 0,2 mm (kg/roll) Berat Actual Toleransi 0,3 mm (kg/roll) Berat Actual Toleransi 0,5 mm (kg/roll)
M4 (coil) 4 2,1 x 54 15 x 15 154,47 139,41 132,17 118,27
M4 4 2,1 x 5,4 15 x 15 15,45 13,94 13,22 11,83
M5 (coil) 5 2,1 x 54 15 x 15 241,36 222,44 213,27 195,50
M5 5 2,1 x 5,4 15 x 15 24,14 22,24 21,33 19,55
M6 (coil) 6 2,1 x 54 15 x 15 347,56 324,77 313,67 292,05
M6 6 2,1 x 5,4 15 x 15 34,76 32,48 31,37 29,20
M7 7 2,1 x 5,4 15 x 15 47,31 44,64 43,34 40,79
M8 8 2,1 x 5,4 15 x 15 61,79 58,74 57,24 54,31
M9 9 2,1 x 5,4 15 x 15 78,20 74,76 73,07 69,75
M10 10 2,1 x 5,4 15 x 15 96,54 92,72 90,84 87,13
M11 11 2,1 x 5,4 15 x 15 116,82 112,61 110,53 106,44
M12 12 2,1 x 5,4 15 x 15 139,02 134,43 132,16 127,68

Jenis-Jenis Wiremesh

Wire Decking
Wire Decking
Wire Container

Wire Container
Temporary Fence

Temporary Fence
Wire Mesh Fence

Wire Mesh Fence
358 High Security Fence

High Security Fence
Chain Link Fence

Chain Link Fence
Welded Fence

Welded Fence
Galvanized Barbed Wire

Galvanized Barbed Wire
Wire Container

Wire Container

Diamond Wire Mesh

Diamond Wire Mesh
Crimped Wire Mesh

Crimped Wire Mesh
Wire Mesh

Wire Mesh
Wire Fence Mesh

Wire Fence Mesh
Wire Mesh Tray

Wire Mesh Tray
Weave Wire Mesh

Weave Wire Mesh

Ympress Plate

Ympress is the brand name for the series of hot-rolled High-Strength Low-Alloy steel produced by TMCP (Thermal Mechanical Control Process). Through customer focus the Ympress range has been continuously improved and widened to match the increasing requirements of our customers. Ympress delivers high strength steel with consistent properties, excellent surface quality and high formability. To ensure an optimum match with standards, all grades have been designed to meet or exceed specifications conform EN 10149.

Ympress offer a wide range of strength levels between S315MC up to S700MC and a broad dimensional range with gauges between 1.5 and 20 mm and widths up to 2070 mm. Because of the wide dimensional range and the number of strength levels included in the Ympress brand, Ympress can be used for many applications ranging from construction profiles to crane booms.

Chemical Composition

C Mn Si P S Altot Nb V Ti Mo
Guaranteed ≤ 0.08 ≤ 1.90 ≤ 0.15 0.003 ≤ 0.05 ≤ 0.015 ≤ 0.09 ≤ 0.01 ≤ 0.15 ≤ 0.02
Typical CEV 0.35
Typical Pcm 0.16 (Japanese welding society standard)

Mechanical Properties

Thickness ReH in MPa Rm in MPa A80 in % Adp5 in %
Typical 2 – 3 mm 825 840 13
4 – 8 mm 800 845 19
8 – 10 mm 750 825 18
Guaranteed ≥ 690 750 – 950 ≥ 12 ≥ 14
Bend 0.5t for thickness ≤ 3mm
1t for thickness ≤ 6mm
1.5t for thickness > 6mm

Ympress Benefits

The consistency in chemical composition and production conditions provide the basis for the consistency in product properties of Ympress. Through its properties Ympress contributes to an optimum and efficient processing and high quality finished products.

  • Formability:
    The precise control of the sulphur content prevents the formation of MnS particles resulting in improved bending characteristics for Ympress. Even the use of a very small bending radius (0t) is possible for many strength levels. The guaranteed elongation levels are leading in the European industry.
  • Consistency:
    Ympress’ consistent properties and narrow gauge control ensure the same bending behaviour from sheet to sheet and from coil to coil. This reduces the intermediate setup times for tooling and increases efficiency.
  • Welding:
    The guaranteed low carbon equivalent allows Ympress to be welded trouble free with the commonly used welding methods. Pre- or post heating of the steel is therefore not necessary.
  • Galvanising:
    Most Ympress can directly be galvanised, the very low silicon content prevents the formation of surface defects by the Sandelin effect. For the highest strength levels E690TM and S700MC it is recommended to test the galvanising conditions first.
  • Laser cutting:
    For the optimisation of your laser cutting process we recommend the use of Ympress Laser. Ympress Laser is a superior product because of the low tensions in the material, the low silicon content and the extra high surface quality.
  • High surface quality:
    The low silicon content of all Ympress grades avoids the formation of so called ‘tiger stripes’ . The high quality surface can lead to fewer processing steps during manufacture.


The low carbon equivalent of Ympress makes it readily weldable and permits the use of high welding speeds. There is no need for pre-or post-welding treatment.

Adjacent to the weld a narrow Heat Affected Zone (HAZ) with a slightly decreased hardness is produced, however, with standard welding techniques this has no practical significance.

Tensile tests taken transverse to the weld show the same tensile strength as the parent material.

Stress relieving should be done in temperature ranges of 980° – 1080° F. Heating above this range reduces strength and should be avoided.


Ympress combines high strength with excellent formability and weldability. It is used in applications such :

• Earth Moving Vehicles
• Large Cranes / Mobile Cranes
• Telescopic Booms

In these applications the high strength of steel is used to save weight and increase the load bearing capacity.

Product Wear Plates:

Harga Baja VCN

Steel VCN 150

It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent VCN 150

Thyssen 6582, DIN 34NiCrMo6, ASSAB 705, JIS SMCM 431, AISI 4340

Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38–0.43 0.20–0.35 0.60–0.80 0.40 Max 0.040 Max 1.65–2.00 0.70–0.90 0.20-0.30

Mechanical Properties
Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Lebih Detail »

Related Machinery Steel:

Harga AISI 1045 Steel

AISI 1045 Steel Roundbar

AISI 1045 Steel is a medium strength steel. Suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or round bar or flat. They are excelling in weldability & machinability , and they can be subjected to various heat treatments. Based on JIS G 4051-2009
AISI 1045 Steel Standard and Grade: JIS S45C DIN1.1151 is typical for flame hardening, and can produce a surface hardness of 500 BHN to a depth of 0.10 in this applies particularly to shafts and gears

Round bar, Flat


Round Bar: Φ 3.2 – 400mm

Flat: 10 – 90 mm & 205 – 305mm or

Mechanical Properties
* Density (kg/m3) 7700-8030
* Young’s Modulus (GPa) 190-210
* Tensile Strength (Mpa) 569 (Standard) 686 (Quenching, Tempering)
* Yield Strength (Mpa) 343 (Standard) 490 (Quenching, Tempering)
* Poisson’s ratio 0.27-0.30

Brinell Hardness (HB) 160-220 (Annealed)

DIN Equivalents for JIS S45C
C45, CK45, CF45, CQ45

ASTM Equivalents for JIS S45C
ASTM A29 , ASTM A510 , ASTM A519 , ASTM A576 , ASTM A682

SAE Equivalents for JIS S45C
SAE J403 , SAE J412 , SAE J414

AISI Equivalents for JIS S45C
AISI 1045, AISI 1046

EN Equivalents for JIS S45C
EN-8 / BS 970 080M40,Thyssen 1191, ASSAB 760

Chemical Composition

C Si Mn P S
0.42–0.48 0.15–0.35 0.6–0.9 0.030 Max 0.035 Max

Heat Treatment
The following temperature ranges are applicable for the respective heat treatment operations.
Full Annealing 800 – 850°C
Normalising 840 – 880°C
Hardening 820 – 860°C
Quenching medium Water or Oil
Tempering 550 – 660°C

Melting Point
Melting point: 1520 Degree Celsius


Standard punch head, special punch head and thread rolling tool requiring high precision, long service and abrasion resistance. Various machining tools, e. G. Lathe bit, milling cutter, drill bit, screw tap, round saw and other metal machining tools and wood machining tools. Also suitable for manufacture of forming tools, e. G. Cold extrusion head, extrusion die, punch dies of long service life, and plastic molds of high precision and long service life.

For further info Send by email to: sales@beyond-steel.com
Untuk informasi stock dan update harga terbaru
silahkan menghubungi sales team kami

Related Machinery Steel: