For wear and tear which is not only caused by impact and friction, we provide CREUSABRO 4800 and CREUSABRO 8000. These products have TRIP (Transformation Induced by Plasticity) character and micro carbides that make this product have an active surface resistance, so that this material can last better if there is an impact. This product o can also be used in medium temperature 250–450 C, where other resistance product which generates from water quenched process usually will not be functioning optimally.
The new Creusabro concept-excellent ability to work harden and contribution of micro carbides-gives Creusabro 4000 high wear resistance, on average 4 times higher than ordinary mild steel and 30 % higher than conventional 4000 BHN water quenched steel.
To ease in fabricating, Creusabro 4000 is supplied by approximately 360 HB hardness. After the fabrication, the hardness of Creusabro 4000 can be reach 420 HB.
C : 0.20 max
Mn : 1.40
Cr : 0.85 min
Mo : 0.10 min
Ni : 0.30
S : 0.010 max
P : 0.018 max
Mines: Extractors, Unloaders, Spiral Chutes. Crusher, Grinders, Screens, Conveyor
Quarries and Construction Earth Moving: Shovels, Diggers, Graders, Bulldozers, Dumpers, Dredging machines, Crushers, Grinders, Screens, Hoppers, Mixers, Molds for concrete aggregates
Cement Plants, Refractory Products: Crushers, Hoppers, Chutes, Cyclone, Wheel Excavator Buckets Metallurgical Plant, Scrap recovery, etc
The Creusabro concept-excellent ability to work harden and the supplementary contribution of microcarbides, already used in Creusabro 4000 has been improved in the Creusabro 8000. this grade takes advantage of an additional metal working process: the TRIP effect (Transformation Induce by Plasticity). The combination of this properties give to the Creusabro 8000 an exceptional wear resistance in heavy plates with uniform properties throughout the thickness around 8 times that of the standard mild steel (A572 G65 grade). The properties in extreme conditions are 50% superior to standard water quenched steel (hardness 500HB).
Creusabro 8000 is supplied with the hardness of 420 HB in order to easy the fabrication. After fabrication, the hardness of Creusabro 8000 can reach 540 HB.
C Mn Cr Mo Ni S P
0.280 max 1.60 max 1.60 max 0.20 min 0.40 0.005 max 0.015 max
Mines, Coal mines: Extracting and load equipment, Hopper lateral liner plate, Helical gravity conveyor.
Quarries and Construction Earth Moving: Blades, Outside Stiffeners, Under teeth pads of loaders and shovel dippers, Crushers and Mills lateral armor plate, Feed crown-wheel, Sprocket-wheal.
Cement Plants: Liners for drier-tubes, Buckets, Hoppers, Clinker cooler outlet shields.
Iron and Steel Industry: Scrap recovery, Brick works, Agricultural equipment, etc.
beyond-steel indonesia, distributor creusabro indonesia jual creusabro, ukuran creusabro,harga creusabro,diameter creusabro,dia. creusabro,beli creusabro,distributor creusabro,tebal creusabro,berat creusabro,pabrik creusabro, stockist creusabro,grade creusabro, suplier creusabro,chemical composition creusabro, equivalent of creusabro, mechanical properties creusabro, physical properties creusabro, properties of creusabro, hrc creusabro,thickness creusabro, hardness creusabro
Anda harus log masuk untuk menerbitkan komentar.