ASSAB 760 Machinery Steel

Characteristic
General utility machinery steel for parts requiring wear resistance at low loads.

Equivalents
AISI 1050, DIN CK50, NS 1050, SAE J 403-AISI, 1.1730, UNI 7846,BS 970, UNE 36011,

Chemical Composition

GRADE CHEMCIAL
COMPOSITION (%)
Hardness
supplied approx. HR
C Mn Cr Mo V
760 0.45 0.70 210

 

Applications
Punch holders (jigs), die holders (fixtures) guide plates (simple bending dies), backing plates (simple structural components).

Chromium Molybdenum Steel JIS G 4105

JIS G 4105 : Chromium Molybdenum Steels

Jenis
Material
Chemical Composition %
C Si Mn P Max. S Max. Cr Mo
SCM 415 0.13∼0.18 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 418 0.16∼0.21 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 420 0.18∼0.23 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 421 0.17∼0.23 0.15∼0.35 0.70∼1.00 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 430 0.28∼0.33 0.15∼0.35 0.60∼0.85 0.030 0.030 1.00∼1.50 0.15∼0.30
SCM 432 0.27∼0.37 0.15∼0.35 0.30∼0.60 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 435 0.33∼0.38 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 440 0.38∼0.43 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 445 0.43∼0.48 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30
SCM 822 0.20∼0.25 0.15∼0.35 0.60∼0.85 0.030 0.030 0.90∼1.20 0.15∼0.30

Note : As impurities, Ni and Cu shall not exceed 0.25% and 0.30% respectively for all grades.

Steel 6582

Product: Thyssenkrupp 6582

Kategori: High Tensile Nickel Chrome Steel

Characteristics
It has high hardenability and is capable of giving good properties in large sections. It is relatively free from temper brittleness and retains useful machinability at relatively high hardness.

Equivalent Thyssen 6582
AISI 4340, DIN 34NiCrMo6, ASSAB 705, VCN 150, JIS SMCM 431, Atlas Ultimo 200

Availability
Round bar

Chemical Composition (%)

C Si Mn P S Ni Cr Mo
0.38-0.43 0.20-0.35 0.60-0.80 0.40 Max 0.04 Max 1.65-2.00 0.70-0.90 0.20-0.30

Mechanical Properties

Hardening Temp : 820 – 850 C
Ouenching Medium : Oil
Hardness as Supplied : 220 – 250 BHN,
Sizes Available : 20mm – 300mm

Applications
Automotive crankshafts and rear axle shafts, aircrafts crankshafts, Connecting Rods, Propeller Hubs, Gears, Drive shafts, Landing gear parts and heavy duty parts of rock drill

Product Machinery Steel:

Associated Swedish Steels AB Grades

Grades

Cold Work Steel  ASP 23
Cold Work Steel  ASP 30
Cold Work Steel  ASP 60
Cold Work Steel   88
Cold Work Steel   XW-10
Cold Work Steel   XW-41
Cold Work Steel   XW-42
Cold Work Steel   XW-5
Cold Work Steel  CARMO
Cold Work Steel  DF-3
Cold Work Steel  VANADIS 10
Cold Work Steel  VANADIS 4
Cold Work Steel  VANADIS 4

Hot Work Steel material  8407 2M
Hot Work Steel material  8407 SUPREME
Hot Work Steel material  DIEVAR
Hot Work Steel material  HOTVAR
Hot Work Steel material  QRO 90

Machinery Steel  grade 705/ 705M
Machinery Steel  grade 707
Machinery Steel  grade 709/ 709M
Machinery Steel  grade 7210M
Machinery Steel  grade 760

Plastic Mould Steel material  S136 Grade:DIN:1.4034/GB4Cr13
Plastic Mould Steel material  618
Plastic Mould Steel material  718HH
Plastic Mould Steel material  CALMAX
Plastic Mould Steel material  CORRAX
Plastic Mould Steel material  ELMAX
Plastic Mould Steel material  EM33
Plastic Mould Steel material  EM38
Plastic Mould Steel material  MOLDMAX LH/MM
Plastic Mould Steel material  MOLDMAX XL
Plastic Mould Steel material  Polmax
Plastic Mould Steel material  PRODAX
Plastic Mould Steel material  PROTHERM
Plastic Mould Steel material  RAMAX 2
Plastic Mould Steel material  STAVAX ESR
Plastic Mould Steel material  STAVAX Supreme