Jual Plat Quard 450

Jual Plat Quard 450

Quard 450 offers high wear resistance in applications exposed to increased wear from sliding abrasion and heavy impacts from crushing rocks, gravel, sand or other harsh abrasives.

With a typical hardness of 450 Brinell, Quard 450 combines high strength with very good workability, especially in welding and cold forming.

Quard 450 combines the attributes of hardness and toughness with improved crack resistance and high durability.

Quard 450 in thinner gauges, opens up new design solutions for applications aimed at reducing weight, increasing payload and durability as well as reducing energy consumption and the impact on the environment.

Thickness: 8 – 20 mm
Width: 1500 – 2500 mm
Length: maximum 13 m

Chemical composition: ( % )

C Si Mn Cr Mo P Ni S B
 0.21 0.70 1.60 0.50 0.25 0.025 0.025 0.010 0.005

Mechanical Properties
Hardness (HBW) : 420 – 480
Charpy-V notch : 35 J
impact test (longitudinal at -40 °C)
Yield Strength (MPa): 1100
Tensile Strength (MPa): 1400
Elongation (%): 10

Quard 450 is mainly recommended for the following applications:
• on road tipper and dumper bodies
• cement drum mixer barrels,
• refuse haulers, scrap containers
• buckets, knives
• feeders, skips, screw conveyors
• mining and earthmoving machinery

Product Wear Plates:

Back to Top
Jual Plat Quard 400

Jual Plat Quard 400

Quard 400 is an abrasion resistant steel with an initial hardness of 400 Brinell.

Due to its optimal combination of hardness, strength and ductility, Quard 400 can be used in any application subject to wear from various hard abrasives such as rocks, sand, minerals, scrap, waste or other aggressive materials.

Quard 400 is easy to bend, cut, machine and weld (to some extent, it’s like processing mild steel).

In all thicknesses Quard 400 provides an excellent surface finish within tight thickness tolerances, with a high-quality appearance and maximum fitting accuracy.

Quard 400 is ideal for applications such as: buckets, crushers, cutting edges, dump trucks, loaders, skips, sieves, feeders, measuring pockets, skips, etc

Quard 400 at present is supplied in the following range:
• thickness: 4 – 30 mm
• width: 1500 – 3100 mm

Chemical composition: ( % )

C Si Mn Cr Mo P Ni S B
 0.19 0.60 1.60 0.50 0.25 0.025 0.025 0.010 0.005

Mechanical Properties
Hardness (HBW) : 370 – 430
Charpy-V notch : 40J
impact test (longitudinal at -40 °C)
Yield Strength (MPa): 1050
Tensile Strength (MPa): 1250
Elongation (%): 10

• mining and earthmoving machinery
• crushing and pulverizing equipment
• buckets, knives, crushers, feeders
• presses
• skips
• excavators
• slurry pipe systems
• screw conveyors

Product Wear Plates:

Jual Plat Bisalloy450

Bisalloy450 is a through hardened abrasion resistant steel plate with guaranteed high impact toughness.

Chemical Composition

Thickness C P Mn Si S Ni Cr Mo B CE PCM
6 – 20 Maximum 0.23 0.025 1.00 0.60 0.008 0.25 1.00 0.25 0.002 0.46 0.30
25 – 50 Maximum 0.23 0.025 1.20 0.60 0.008 0.25 1.20 0.35 0.002 0.58 0.3


A unique chemical composition and steelmaking process for Bisalloy450 has been developed, incorporating
low carbon/low manganese contents. This is designed to improve transverse mechanical properties and produce low levels of segregation and ensures the newly developed Bisalloy450 not only has superior mechanical properties but also good formability and weldability.

Bisalloy450 can be readily welded using conventional low hydrogen MWAW and GMAW welding consum ables and processes. It can be welded to other weldable steels.

BISALLOY 450 can be cold bent by brake press-bending or roll bend method. However, Bisalloy 450 has higher hardness and strength levels compared to plain carbon steels and therefore suitable consideration of sufficient machine, plate bending direction and former radii must be made. Bisalloy450 should be bent at room temperature or below 200ºC to avoid reduction of mechanical properties.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 1150 MPa
Tensile Strength 1400 MPa
Elongation in 50mm G.L 12%
Charpy Impact (longitudinal) +40ºC
8mm (T) x 10mm x 5mm
10mm (T) x 10mm x 7.5mm
12 – 20mm (T) x 10mm x 10mm
>20 – 40mm (T) x 10mm x 10mm
>40 – 50mm (T) x 10mm x 10mm
17 J (min)
21 J (min)
25 J (min)
20 J (min)
15 J (min)
Hardness 425 – 475 HB 450HB


Long life expectancy in high impact abrasion applications makes Bisalloy 450 the ideal choice for a variety of applications, including:

• Dump Truck Bodies & Dump Truck Wear Liners
• Mining Buckets
• Tipper Bodies
• Cutting Edges
• Construction Waste Bins
• Liner Plates / Chutes

Product Wear Plates:

Creusabro 4800 & 8000


For wear and tear which is not only caused by impact and friction, we provide CREUSABRO 4800 and CREUSABRO 8000. These products have TRIP (Transformation Induced by Plasticity) character and micro carbides that make this product have an active surface resistance, so that this material can last better if there is an impact. This product o can also be used in medium temperature 250–450 C, where other resistance product which generates from water quenched process usually will not be functioning optimally.

Creusabro 4000
The new Creusabro concept-excellent ability to work harden and contribution of micro carbides-gives Creusabro 4000 high wear resistance, on average 4 times higher than ordinary mild steel and 30 % higher than conventional 4000 BHN water quenched steel.

To ease in fabricating, Creusabro 4000 is supplied by approximately 360 HB hardness. After the fabrication, the hardness of Creusabro 4000 can be reach 420 HB.

Chemical Composition:

C : 0.20 max
Mn : 1.40
Cr : 0.85 min
Mo : 0.10 min
Ni : 0.30
S : 0.010 max
P : 0.018 max

Mines: Extractors, Unloaders, Spiral Chutes. Crusher, Grinders, Screens, Conveyor
Quarries and Construction Earth Moving: Shovels, Diggers, Graders, Bulldozers, Dumpers, Dredging machines, Crushers, Grinders, Screens, Hoppers, Mixers, Molds for concrete aggregates
Cement Plants, Refractory Products: Crushers, Hoppers, Chutes, Cyclone, Wheel Excavator Buckets Metallurgical Plant, Scrap recovery, etc

The Creusabro concept-excellent ability to work harden and the supplementary contribution of microcarbides, already used in Creusabro 4000 has been improved in the Creusabro 8000. this grade takes advantage of an additional metal working process: the TRIP effect (Transformation Induce by Plasticity). The combination of this properties give to the Creusabro 8000 an exceptional wear resistance in heavy plates with uniform properties throughout the thickness around 8 times that of the standard mild steel (A572 G65 grade). The properties in extreme conditions are 50% superior to standard water quenched steel (hardness 500HB).

Creusabro 8000

Creusabro 8000 is supplied with the hardness of 420 HB in order to easy the fabrication. After fabrication, the hardness of Creusabro 8000 can reach 540 HB.

Chemical Compositions:
C Mn Cr Mo Ni S P
0.280 max 1.60 max 1.60 max 0.20 min 0.40 0.005 max 0.015 max


Mines, Coal mines: Extracting and load equipment, Hopper lateral liner plate, Helical gravity conveyor.
Quarries and Construction Earth Moving: Blades, Outside Stiffeners, Under teeth pads of loaders and shovel dippers, Crushers and Mills lateral armor plate, Feed crown-wheel, Sprocket-wheal.
Cement Plants: Liners for drier-tubes, Buckets, Hoppers, Clinker cooler outlet shields.
Iron and Steel Industry: Scrap recovery, Brick works, Agricultural equipment, etc.

beyond-steel indonesia, distributor creusabro indonesia jual creusabro, ukuran creusabro,harga creusabro,diameter creusabro,dia. creusabro,beli creusabro,distributor creusabro,tebal creusabro,berat creusabro,pabrik creusabro, stockist creusabro,grade creusabro, suplier creusabro,chemical composition creusabro, equivalent of creusabro, mechanical properties creusabro, physical properties creusabro, properties of creusabro, hrc creusabro,thickness creusabro, hardness creusabro

Plat FORA 400


FORA 400 is a water quenched maternistic steel, with a typical hardness of 400HB (42,5HRC), constituting a real answer to abrasive wear. Thanks to its toughness, its elevated hardness, its high yield strength, FORA 400 can be use wherever a wear resistance to wear by sliding or by moderate impacts is required. Moreover, FORA 400 is very easily welded and has a good forming properties thereby contributing to ease of fabrication.

Compared to conventional steels, such as S355, FORA 400 offers a real benefit to the equipment life times and permits a signifiant reduction in he design thickness since its wear resistance is up to 3 times longer than S355 grade.

Moreover, FORA 400 is very easily welded and has a good forming properties thereby contributing to ease of fabrication. This steel is particulary suitable for applications in quarries, construction industry, mines, cement plants, the iron and steel industry, etc.

Chemical Composition
C Mn Cr Mo S max P max
0.13 1.2 0.5 0.25 0.01 0.02

Quarries and Construction Earth Moving: Skimmers, crushers, screens, bunkers, bulldozers, etc.
Cement Plants: Buckets, crushers, bunkers, etc.
Mines, Coal mines: Excavator, winding and discharging machines, conveyors, etc.
Iron and steel industry: Bunkers, various casing, guide and shifting plates, etc.

Beyond-Steel Indonesia, distributor FORA 400 Indonesia jual FORA 400, ukuran FORA 400,harga FORA 400,diameter FORA 400,dia. FORA 400,beli FORA 400,distributor FORA 400,tebal FORA 400,berat FORA 400,pabrik FORA 400, stockist FORA 400,grade FORA 400, suplier FORA 400,chemical composition FORA 400, equivalent of FORA 400, mechanical properties FORA 400, physical properties FORA 400, properties of FORA 400, hrc FORA 400,thickness FORA 400, hardness FORA 400

Related Wear Plates:

Harga Plat Bisalloy 80

Dear valued customers,
Beyond-Steel menjual plat bisalloy Grade 80 (Bis-80) import dengan ukuran dan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:
Tel  : +62-021-3293 5972
Fax : +62-021-8837 6742
Mobile: +62-0858 8044 6226
E-mail: sales@beyond-steel.com


Bis-80 is a high strength, low alloy steel plate with a yield stress three times of carbon steel and featuring low carbon, excellent notch toughness, good weldability and formability.


Bis 80 is a low alloy high stregthsteel manufactured with a controlled carbon equivalent for optimum weldability.

Bis 80 can be successfully welded to itself and a range of other steels, provided low hydrogen consumables are used and attention is paid to pre-heat, interpass temperature, heat input and the degree of joint restraint.

Stress relieving can be achieved at 540ºC – 570ºC. Heating above this temperature should be avoided to minimize any adverse effects on mechanical properties. Cold forming can be successfully conducted, provided due account is taken of the increased strength of the steel.

Mechanical Properties

Properties Specification Typical
0,2% Proof Stress 690 MPa (Min)* 750 MPa
Tensile Strength 790-930 MPa* 830 MPa
Elongation in 50mm G.L 18%* 26%
Charpy Impact (longitudinal) +20ºC (10mm x 10mm) 40 J (Min)* 160 J
Hardness 255 HB

*Dependant on Plate Thickness

Chemical Composition

Thickness C P Mn Si S Cr Mo B CE
5 – < 16 Maximum 0.18 0.025 1.5 0.25 0.008 0.25 0.25 0.002 0.40 0.29
>= 16 – 80 Maximum 0.20 0.025 1.5 0.25 0.008 0.30 0.25 0.002 0.50 0.35
> 80 – 100 Maximum 0.18 0.025 1.5 0.25 0.008 1.20 0.25 0.002 0.58 0.34


• Transport Equipment ( Low Loaders )
• Mining Equipment (Longwall Roof Supports/ Dump Truck Tray )
• High Rise Building ( Columns )
• Induced Draft Fans
• Excavator Buckets
• Lifting Equipment ( Mobile Cranes / Container Handling Equipment )
• Bridges
• Storage Tanks

Product Wear Plates:

Harga Plat Sumihard K-400

Dear valued customers,
Tersedia dijual plat Sumihard Grade K-400, K-450, K-500 import, dengan ukuran dan ketebalan bervariasi. Untuk informasi stock dan harga silahkan hubungi kami:

Tel  : +62-021-3293 5972
Fax : +62-021-8837 6742
Mobile: +62-0858 8044 6226
E-mail: sales@beyond-steel.com

Sumihard K-400 Wear Resistant Alloy Steel Plate
Sumihard K-400 is a through hardened abrasion resistant steel with a typical hardness of 415 BHN. These steels are the most widely used of the wear resistant grades. They exhibit an excellent combination of high resistance to impact, workability, weldability and resistance to abrasion. It has about 3 times the abrasion resistance of common steel plate and contribute to prolonging the service life of mechanical parts.

Chemical Composition

Chemical   C Si Mn    P S B
Composition % < 0.21 < 0.70 < 1.60 < 0.025 < 0.01 < 0.003

Mechanical Properties
Brinell Hardness: 360-440
Heat Treatment: Quenched & Tempered
Yield Point min MPa: 1156 MPa
Tensile Strength MPa: 1325 MPa
Elongation: 25%

Tabel Ukuran dan Berat Nominal Plat Sumihard K-400

Product Ukuran Berat
Plat Sumihard 5 mm x 2500 x 8000 mm =         785 Kg
Plat Sumihard 6 mm x 2500 x 8000 mm =         942 Kg
Plat Sumihard 8 mm x 2500 x 8000 mm =      1,256 Kg
Plat Sumihard 10 mm x 2500 x 8000 mm =      1,570 Kg
Plat Sumihard 12 mm x 2500 x 8000 mm =      1,884 Kg
Plat Sumihard 16 mm x 2500 x 8000 mm =      2,512 Kg
Plat Sumihard 20 mm x 2500 x 8000 mm =      3,140 Kg
Plat Sumihard 25 mm x 2500 x 8000 mm =      3,925 Kg
Plat Sumihard 30 mm x 2500 x 8000 mm =      4,710 Kg
Plat Sumihard 32 mm x 2500 x 8000 mm =      5,024 Kg
Plat Sumihard 35 mm x 2500 x 8000 mm =      5,495 Kg
Plat Sumihard 40 mm x 2500 x 8000 mm =      6,280 Kg
Plat Sumihard 50 mm x 2500 x 8000 mm =      7,850 Kg
Plat Sumihard 90 mm x 2500 x 8000 mm =   14,130 Kg
Plat Sumihard 120 mm x 2500 x 8000 mm =   18,840 Kg

Formula Hitung Berat/lembar = [ (TebalxLebarxPanjang x 7,85)/ 1.000.000 ]

Cutting is possible with oxy-propane, oxy-acetylene, plasma, laser and water. Stack cutting should be avoided. After gas cutting, the steel plate should not be sprayed or cooled with water. Tungsten Carbide tools are recommended with close attention to cutting speeds and feeds.

Machining speeds are 50-70% of plain carbon steel. Constant feed and lubrication should be maintained.

Cold forming can be carried out using the following guidelines

Welding can be carried out by manual metal arc, submerged arc or gas metal arc welding. Because the properties of Sumihard 400 results from quenching and tempering, to obtain optimum results the following recommendations should be served when welding.

  • Electrodes and fluxes should be of the low hydrogen type, baked and stored strictly in accordance with the manufacturers recommendations.
  • It is recommended that Sumihard 400 be preheated to a suitable temperature to eliminate the risk of cold cracking in the weld area.
  • The selection of preheat temperatures are dependant upon the plate thickness, geometry and other associated factors. The minimum preheat temperatures for optimum results are set out in the following chart:

Dump Truck Liners, Ripper Tynes, Bucket Wear Liners, Cutting Edges, Mining Liner Plates, Agricultural Machinery

Related Wear Plates: